On ons, 2008-05-14 at 15:51 -0700, [EMAIL PROTECTED] wrote:
> Hi,
> 
> I was using net-snmp 5.1.4 earlier and we have a subagent communicating
> using agentx with our master agent. Things were working fine.
> 
> We are now trying to upgrade to net-snmp 5.4.1 and the master agent and
> the subagent are not communicating. The subagent seems to register the
> MIBS fine, I can see this when I turn on logging using -Dagentx. After
> that the snmpget requests are timing out. I see that the master agent is
> sending these requests but not getting any response and is eventually
> timing out and closing the connection. On the subagent's  end, the
> 'agent_check_and_process(1)' call does not come out indicating that it
> did not receive any packets ? 
> 
> 1. I am building net-snmp 5.4.1 with openssl10.9.7m and ipv6 enabled.
> 2. Running SNMPv3 and snmpd.conf has 
> master agentx 
> agentXTimeout 10 
> agentXRetries 6 
> agentXSocket tcp:127.0.0.1:705 (we are using tcp sockets and not unix
> stream sockets).
> 3. snmpd is run as follows $MY_SNMP_PATH/snmpd -x tcp:127.0.0.1:705
> udp:8500 -c /MY_SNMP_PATH/snmpd.conf ie. master is listening on 8500 and
> to subagent (agentX) on 705
> 4.Subagent code does - 
> netsnmp_ds_set_boolean(NETSNMP_DS_APPLICATION_ID,NETSNMP_DS_AGENT_ROLE,
> 1); - 
> netsnmp_ds_set_string(NETSNMP_DS_APPLICATION_ID,NETSNMP_DS_AGENT_X_SOCKE
> T,"tcp:127.0.0.1:705"); prior to init_agent and init_snmp
> Is it really necessary to have a configuration file with the name given
> in init_agent() ? We have not had that so far and things worked fine ?
> An snmpwalk on .1.3.6.1.2.1 snmpd responds no problems. 
> Snmpwalk for my subagent OID results in packets piling on the 705
> connection and it eventually closes with log trace - Timeout: No
> Response from localhost:8500 
> netstat traces 
> udp 0 0 0.0.0.0:8500 0.0.0.0:*
>  ...
>  tcp 0 0 127.0.0.1:705 0.0.0.0:* LISTEN 
> tcp 0 0 127.0.0.1:705 127.0.0.1:41817 ESTABLISHED 
> tcp 3168 0 127.0.0.1:41817 127.0.0.1:705 ESTABLISHED 
> ...
>  tcp 0 0 127.0.0.1:705 0.0.0.0:* LISTEN 
> tcp 4513 0 127.0.0.1:41817 127.0.0.1:705 CLOSE_WAIT 
> tcp 0 0 127.0.0.1:705 127.0.0.1:41817 FIN_WAIT2 
> This has been working fine with NetSNMP-5.1.4 . Appreciate any inputs as
> to what I'm missing !!!  Is there anything new in 5.4.1 not present in
> 5.1.4 ?

Yes. The transport setup is rewritten.

Could you please run your subagent with the following debug flags:

agentx,tdomain,netsnmp_ds

and send the log.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft 
Defy all challenges. Microsoft(R) Visual Studio 2008. 
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Reply via email to