Sorry, Ctrl+Enter along with being distracted sent the email before I
was finished...
I was just wondering if anyone had seen a howto or site that chronicled
someone changing their SNMPd to run on ports other than 161/162.
I've found many people talk about their ISP blocking the ports, but
no-one saying "so here's how I changed my ports".
I've tried searching for "agentaddress snmpTrapdAddr", which, I think,
would be things required to be on a page discussing changing ports, but
I only find 4 results, no-one has made a page it seems that shows how
this is done. I suspect if I ever get it working, this email list will
be searched by some future unfortunate soul and they'll be grateful for
any help you give.
Thanks,
Daniel
Daniel Gibby wrote:
Thanks for the tip, it does seem to do something, but times out and
gives no response received...
Maybe I'm not understanding what the snmptrap is for and the protocol
isn't working correctly.
I can telnet (I'm using tcp now, remember?) to port 10161 and port 10162
from either machine, but snmpwalk times out.
What amazes me is how hard it has been finding any help or howtos or
someone writing down on the Internet how they have done this in the past.
I've tried dozens of searches, including things like
Thanks,
Daniel
Dave Shield wrote:
2008/9/4 Daniel Gibby <[EMAIL PROTECTED]>:
I just changed the server to listen on tcp, how do I test it with
snmpwalk via tcp?
snmpwalk ..... tcp:host:10161
Dave
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users