> From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Ricardo Schmidt > Sent: Wednesday, August 27, 2008 7:01 AM
> It's my first contact with SNMP. I've already installed net-snmp to > help me with that. Now I need to install two MIBs: CISCO-SMI and > CISCO-NBAR-SUPPORT-PROTOCOL-MIB. Well, I'm just building an > application that needs some information that these MIBs can gather to > me. > > First, I don't know exactly how to install a new MIB. There are many > ways in the Internet. So, I don't know what follow. I tried some of > them without success. Could anyone give me the address to a reliable > tutorial for installing and compiling MIBs? http://www.net-snmp.org/wiki/index.php/TUT:Using_and_loading_MIBS You will not need to compile the MIBs, but must have access to equipment that has running MIBs. You will also need to ensure that you can access the data. > Second, I found in the Cisco website, a tutorial about how to test and > use the MIBs I am trying to install. But, there is a command called > "getmany". I found that it is a SNMP command for executing MIBs > functionalities (or sth like that). However, my system do not > recognize this command. Neither getmany or getbulk. What should I do > in order to have this command working properly? There is no SNMP command "getmany". This is probably an application, possibly equivalent to net-snmp's snmpwalk. HTH, Mike ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
