Hi ALL,
     I have a problem in implementing snmpcommunity and snmptargetTable etc
(access realted tables). My requirement is I have to implement those table
so the while run time ,  I can configure the snmp-agent by creating a new
rows for the access controling Tables (snmpCommuntiyTable,
snmpTargetAddTable ,vacm etc )

   so by default the snmpd will take a access configuration form snmpd.conf
file , so how to reset those snmpd.conf data by using snmpcommunitytable
etc..,  how to replace those snmpd.conf  or how to use the
snmpcommunitytable, snmpaddressTable , vacm, etc. to have access control
along with or without snmpd.conf access support.

   Please give me some idea to solve this problem.

/* Actually My requirement is , I  will get a  x.config file
dynamically(volatile values)  ,  which contains SnmpCommunitystring,
SnmpAddTargetTable etc details (access control detials ), So I have to
collect those values and set  the  corresponding access tables , So I am
doing it but its not effort  the Agent.  For example ::  I will get a
snmpcommunity String as "vendor_2323"  so i  have  set the
snmpCommunityTable  and it should  effort  if any usere uses. snmpwalk -v2c
-c vendor_2323 xxx oid , but its not given any things....           " How to
solve it  please give me some idea "

         Thank's for the help..............





On Mon, Sep 22, 2008 at 5:47 AM, <
[EMAIL PROTECTED]> wrote:

> Send Net-snmp-users mailing list submissions to
>        [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://lists.sourceforge.net/lists/listinfo/net-snmp-users
> or, via email, send a message with subject or body 'help' to
>        [EMAIL PROTECTED]
>
> You can reach the person managing the list at
>        [EMAIL PROTECTED]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Net-snmp-users digest..."
>
>
> Today's Topics:
>
>   1. Leigh Williamson/UK/CSC is out of the office. (Leigh Williamson)
>   2. snmptrap message (Andrea Bencini)
>   3. RE: snmptrap message (Arazo Camprecios, Marc)
>   4. I have implemted a Vacm table and register to my
>      Subagent(agentx) ,        But Unable to get the Values ? (kumar
> undurthi)
>   5. I found the value being truncated in the red color part,  when
>      I use snmpwalk to get mib value (hungta)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 20 Sep 2008 04:02:22 +0100
> From: Leigh Williamson <[EMAIL PROTECTED]>
> Subject: Leigh Williamson/UK/CSC is out of the office.
> To: [email protected]
> Message-ID:
>        <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=US-ASCII
>
>
> I will be out of the office starting  19/09/2008 and will not return until
> 29/09/2008.
>
>
> For Escalation Contact: Dave Higginson
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 20 Sep 2008 10:47:23 +0200
> From: "Andrea Bencini" <[EMAIL PROTECTED]>
> Subject: snmptrap message
> To: <[email protected]>
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>        reply-type=original
>
> I installed
> Fedora core 8
> net-snmp-*5.4.1-7.fc8
> I started snmptrapd and I received this messages in "messages" log:
>
> snmptrapd[6384]: netsnmp_assert !"registration != duplicate" failed
> agent_registry.c:535 netsnmp_subtree_load()
>
> Can you help me?
> Thanks
> Andrea
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 22 Sep 2008 08:57:23 +0200
> From: "Arazo Camprecios, Marc" <[EMAIL PROTECTED]>
> Subject: RE: snmptrap message
> To: "Andrea Bencini" <[EMAIL PROTECTED]>,
>        <[email protected]>
> Message-ID:
>        <[EMAIL PROTECTED]>
> Content-Type: text/plain;       charset="iso-8859-1"
>
> Don't worry! This is a "common" annoying message. The new version of
> net-snmp solves this inconvenient.
>
> Regards,
> Marc Arazo
> Indra
>
> -----Mensaje original-----
> De: Andrea Bencini [mailto:[EMAIL PROTECTED]
> Enviado el: s?bado, 20 de septiembre de 2008 10:47
> Para: [email protected]
> Asunto: snmptrap message
>
> I installed
> Fedora core 8
> net-snmp-*5.4.1-7.fc8
> I started snmptrapd and I received this messages in "messages" log:
>
> snmptrapd[6384]: netsnmp_assert !"registration != duplicate" failed
> agent_registry.c:535 netsnmp_subtree_load()
>
> Can you help me?
> Thanks
> Andrea
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Net-snmp-users mailing list
> [email protected]
> Please see the following page to unsubscribe or change other options:
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 22 Sep 2008 02:08:52 -0700
> From: "kumar undurthi" <[EMAIL PROTECTED]>
> Subject: I have implemted a Vacm table and register to my
>        Subagent(agentx) ,      But Unable to get the Values ?
> To: [email protected]
> Message-ID:
>        <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi All,
>      I have implemted a vacmSecurityToGroupTable, snmpCommunityTable,
> vacmAccessTable, vacmViewTreeFamilyTable  and register to my
> Subagent(Agentx) and trying to query for the values in those tables. So I
> am
> unable to get those values instead I am getting the values in the
> snmpd.conf
> (perment values ) file which i have give for starting the snmpd.
>
>         Please give idea to get those table values and is there any othere
> way to get , Did i missed any seteps.
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 5
> Date: Mon, 22 Sep 2008 20:47:18 +0800
> From: "hungta" <[EMAIL PROTECTED]>
> Subject: I found the value being truncated in the red color part,
> when
>        I use snmpwalk to get mib value
> To: <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED],      'netsnmp maillist'
>        <[email protected]>
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear Sir,
>
> I use netsnmp command "snmpwalk" to get the mib value as following example
>
> I found the value being truncated in the red color part
>
> How can I fix the problem, please help me
>
> thanks
>
>
>
>
>
> LAB-8600-FAULT-MIB::eventHistoryEventId.190552 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190553 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190554 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190555 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190556 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190557 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190558 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190559 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190560 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190561 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190562 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190563 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190564 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryEventId.190565 = INTEGER: 1769474
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189066 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189067 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189068 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189069 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189070 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189071 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189072 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189073 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189074 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189075 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189076 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189077 = STRING: Signal degrade. Bit
> errors detected in received si
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189078 = STRING: Ima alarm link lif.
> Loss of IMA links fault. The a
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189079 = STRING: Ima alarm link tx
> fault. IMA link Tx fault. Implem
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189080 = STRING: Signal degrade. Bit
> errors detected in received si
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189081 = STRING: Ima alarm link tx
> fault. IMA link Tx fault. Implem
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189082 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189083 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189084 = STRING: Ima alarm link lif.
> Loss of IMA links fault. The a
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189085 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189086 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189087 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189088 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189089 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189090 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189091 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189092 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189093 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189094 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189095 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189096 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189097 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189098 = STRING: Tx circuit down.
> Circuit is down in transmit direc
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189099 = STRING: Ima alarm link tx
> fault. IMA link Tx fault. Implem
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189100 = STRING: Ima alarm link rx
> fault. IMA link Rx fault. Implem
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189101 = STRING: Signal degrade. Bit
> errors detected in received si
>
> TLAB-8600-FAULT-MIB::eventHistoryName.189102 = STRING: Ima alarm link lif.
> Loss of IMA links fault. The a
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>
> ------------------------------
>
> _______________________________________________
> Net-snmp-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>
>
> End of Net-snmp-users Digest, Vol 28, Issue 23
> **********************************************
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Reply via email to