Ahhh, yes. The humor is good. Thanks for that. I wish I could explain
why it doesn't work though...
Paul R. Hogan
Computer System Engineer
Enterprise Information Technology
HAWORTH, INC.
One Haworth Center
Holland, MI 49423
direct 616.393.3756
fax 616.396.9389
[email protected]
www.haworth.com
NOTICE OF CONFIDENTIALITY: The contents of this e-mail message and any
attachments are intended for the addressee(s) named in this message.
This communication is intended to be and to remain confidential. If you
are not the intended recipient of this message, or if this message has
been addressed to you in error, please immediately alert the sender by
reply e-mail and then delete this message and its attachments. Do not
deliver, distribute or copy this message and/or any attachments and, if
you are not the intended recipient, unless immediately and permanently
deleted, recipient hereby agrees to protect this transmission and any
documents, files or previous messages attached (confidential
information) in the same manner in which recipient acts to protect
his/her/its own confidential information.
From: Nikos Balkanas [mailto:[email protected]]
Sent: Thursday, January 08, 2009 10:03 AM
To: Paul Hogan; [email protected]
Subject: Re: Issues with snmpwalk and net-snmp 5.4.2.1 on HP UX.
Pitty! We would have corrected it in a while, with less effort and would
have found out what was wrong with it. And you would end up with a
cleaner system.
Can you break it again?
Just kidding :-)
Nikos
----- Original Message -----
From: Paul Hogan <mailto:[email protected]>
To: Paul Hogan <mailto:[email protected]> ; Nikos Balkanas
<mailto:[email protected]> ; [email protected]
Sent: Thursday, January 08, 2009 4:23 PM
Subject: RE: Issues with snmpwalk and net-snmp 5.4.2.1 on HP UX.
Ok. So I am a little shocked, but not completely. I had to do
some strange things, but now it is working. I reinstalled the 5.4.1.2
version of net-snmp that comes from HP's software depot. This version
fails on compile, because it doesn't have all of the library files.
Then I restarted the 5.4.2.1 version that I downloaded and compiled on
this box and now it works. It is like the HP .depot install sets up
some of the path and common files needed and then the 5.4.2.1 version
compiles correctly and runs once the other version is installed. Not
the cleanest thing, but it is working now. Anyone else run into this
before?
Paul R. Hogan
Computer System Engineer
Enterprise Information Technology
HAWORTH, INC.
One Haworth Center
Holland, MI 49423
direct 616.393.3756
fax 616.396.9389
[email protected]
www.haworth.com
NOTICE OF CONFIDENTIALITY: The contents of this e-mail message
and any attachments are intended for the addressee(s) named in this
message. This communication is intended to be and to remain
confidential. If you are not the intended recipient of this message, or
if this message has been addressed to you in error, please immediately
alert the sender by reply e-mail and then delete this message and its
attachments. Do not deliver, distribute or copy this message and/or any
attachments and, if you are not the intended recipient, unless
immediately and permanently deleted, recipient hereby agrees to protect
this transmission and any documents, files or previous messages attached
(confidential information) in the same manner in which recipient acts to
protect his/her/its own confidential information.
From: Paul Hogan
Sent: Thursday, January 08, 2009 8:52 AM
To: 'Nikos Balkanas'; [email protected]
Subject: RE: Issues with snmpwalk and net-snmp 5.4.2.1 on HP UX.
When I run the ldd snmpwalk command the following output is
given:
ldd snmpwalk
libnetsnmp.sl.16 =>
/opt/iexpress/net-snmp/lib/libnetsnmp.sl.16
libcrypto.sl.0 => /lib/pa20_64/libcrypto.sl.0
libgen.2 => /lib/pa20_64/libgen.2
libnm.sl => /lib/pa20_64/libnm.sl
libipv6.sl => /lib/pa20_64/libipv6.sl
libc.2 => /lib/pa20_64/libc.2
libcrypto.sl.0 => /lib/pa20_64/libcrypto.sl.0
libc.2 => /lib/pa20_64/libc.2
libgcc_s.sl =>
/opt/hp-gcc64-4.2.1/lib/gcc/hppa64-hp-hpux11.11/4.2.1/../../../libgcc_s.
sl
libdl.1 => /lib/pa20_64/libdl.1
libc.2 => /lib/pa20_64/libc.2
libdl.1 => /usr/lib/pa20_64/libdl.1
following commands show the daemon running:
ps -ef |grep -i snmp
root 25650 1 0 Jan 6 ? 0:47
/opt/iexpress/net-snmp/sbin/snmpd -c
/opt/iexpress/net-snmp/etc/snmp/snmpd.conf
snmpd.conf file contains
rocommunity public
running snmpwalk command give following output:
snmpwalk -v 1 -c public localhost .1.3.6.1.2.1.25.3.2
*public is changed to my own SNMP string in the snmpd.conf and
on this line.
Timeout: No Response from localhost
Version of OS
uname -a
HP-UX hollap23 B.11.23 U 9000/800 2629134796 unlimited-user
license
Any thoughts?
Paul R. Hogan
Computer System Engineer
Enterprise Information Technology
HAWORTH, INC.
One Haworth Center
Holland, MI 49423
direct 616.393.3756
fax 616.396.9389
[email protected]
www.haworth.com
NOTICE OF CONFIDENTIALITY: The contents of this e-mail message
and any attachments are intended for the addressee(s) named in this
message. This communication is intended to be and to remain
confidential. If you are not the intended recipient of this message, or
if this message has been addressed to you in error, please immediately
alert the sender by reply e-mail and then delete this message and its
attachments. Do not deliver, distribute or copy this message and/or any
attachments and, if you are not the intended recipient, unless
immediately and permanently deleted, recipient hereby agrees to protect
this transmission and any documents, files or previous messages attached
(confidential information) in the same manner in which recipient acts to
protect his/her/its own confidential information.
From: Nikos Balkanas [mailto:[email protected]]
Sent: Wednesday, January 07, 2009 5:42 PM
To: Paul Hogan; [email protected]
Subject: Re: Issues with snmpwalk and net-snmp 5.4.2.1 on HP UX.
What is your default snmp agent?
Do an
ldd snmpwalk
I suspect that you are not linking to right libraries and your
snmpwalk is malfunctioning.
If that fails try:
snmpd -f -L (-Dall)? - if you are filling lucky.
and use snmpwalk.
Does any snmp* command work?
BR,
Nikos
----- Original Message -----
From: Paul Hogan <mailto:[email protected]>
To: [email protected]
Sent: Wednesday, January 07, 2009 11:04 PM
Subject: Issues with snmpwalk and net-snmp 5.4.2.1 on HP
UX.
I have successfully compiled and installed this version
of net-snmp on 2 different HP UX boxes. Both are running version 11.23
OS. I can get the daemon to start and remain running, but when I try to
run and snmpwalk command it returns with a generic: Timeout: No response
error. I have turned off the default snmp agent, and I have double
checked that the snmpd.conf file is correctly configured. I also turned
on logging for the snmpd daemon, but there are no errors reported. What
else should I check in order to get this working? Any ideas what could
be wrong?
Paul R. Hogan
Computer System Engineer
Enterprise Information Technology
HAWORTH, INC.
One Haworth Center
Holland, MI 49423
direct 616.393.3756
fax 616.396.9389
[email protected]
www.haworth.com
NOTICE OF CONFIDENTIALITY: The contents of this e-mail
message and any attachments are intended for the addressee(s) named in
this message. This communication is intended to be and to remain
confidential. If you are not the intended recipient of this message, or
if this message has been addressed to you in error, please immediately
alert the sender by reply e-mail and then delete this message and its
attachments. Do not deliver, distribute or copy this message and/or any
attachments and, if you are not the intended recipient, unless
immediately and permanently deleted, recipient hereby agrees to protect
this transmission and any documents, files or previous messages attached
(confidential information) in the same manner in which recipient acts to
protect his/her/its own confidential information.
________________________________
------------------------------------------------------------------------
------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB
________________________________
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change
other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
