Some more info:
I am using Net-SNMP 5.3.1. And I get the right value if I print the low and
high values within the agent.
ie, in xx_data_access.c if i do printf xxx.low and xxx.high,
o/p: low: 100, high: 1
but snmpget gives following o/p:
# snmpget -v2c -c public localhost xxxx.0
xxxx.0 = Counter64: 1
Any help appriciated.
Thanks,
Umashankar
--- On Mon, 12/1/09, umashankar tm <[email protected]> wrote:
From: umashankar tm <[email protected]>
Subject: Problem in using Counter64
To: [email protected]
Date: Monday, 12 January, 2009, 7:20 PM
Hi,
In my MIB I have a variable defined as Counter64. when I generate code
using mib2c, it is converted to U64. I am assigning xxx.high = 1 and
xxx.low=100.
rowreq_ctx->data.xxx.high = 1;
rowreq_ctx->data.xxx.low = 100;
If I do snmpget I will get the output as 1. ie only xxx.high is displayed.
Please let me know am I missing out anything or point me to some relevent on
docs.
Regards,
Umashankar
Connect with friends all over the world. Get Yahoo! India
Messenger.------------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
http://p.sf.net/sfu/Xq1LFB_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
Connect with friends all over the world. Get Yahoo! India Messenger at
http://in.messenger.yahoo.com/?wm=n/------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
