Hi all, I've added the compiled the example code from
http://net-snmp.sourceforge.net/dev/agent/scalar__int_8c-example.html to my agent and if I do an SNMP walk I can see the object OK and it has the value I initialise it to. If I try to set it I get the following message: $ snmpset -c public -v 2c 10.0.0.27 1.3.6.1.4.1.8072.2.1.1.0 i 19 Error in packet. Reason: notWritable (That object does not support modification) I've tried with v1, 2c and 3 and with various different users but I always get the same message (I've even tried a different SNMP manager). The object is registered exactly as in the sample code and the MIB says it is read write. The only other thing I can thing might be relevant is that it is being compiled as part of a uClinux embedded system. Can anybody give me any clues where I might need to look. Thanks in advance Phil Mason ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
