To elaborate, when I do a 'make', I reach the following: _________________________________________________________________________________ SNMP Versions Supported: 1 2c 3 Building for : nto Net-SNMP Version : 5.6.rc2 Network transport support: Callback Unix Alias TCP UDP IPv4Base socketBase TCPBase UDPIPv4Base UDPBase SNMPv# Security Modules : usm Agnet MIB code: default modules => snmpv3mibs minII ucd_snmp notification Notification-log-mib target agent_mibs agentx disman/event disman/schedule Utilities MYSQL Trap Logging: unavailable Embedded Perl support: disabled SNMP Perl modules : disabled SNMP Python modules: disabled Crypto support from: internal Authentication support: MD5 SHA1 Encryption support: DES AES __________________________________________________________________________________
Running config.status because the folloing file (s) changed: Config.status And the process continues with all the checking etc... -----Original Message----- From: Ali Mirza, Rashid Sent: Sunday, September 05, 2010 12:48 PM To: net-snmp-users@lists.sourceforge.net Cc: 'Thomas Anders' Subject: RE: : RE: net-snmp 5.2.X compilation errors in QNX Momentics 6.3.0 Hello With net-snmp-5.6 rc2, I did the: ./configure --with-defaults Which finishes, but after configure when I do a 'make' it just keeps going on and on in a loop, repeating itself. I really want to get the net-snmp to work successfully in a QNX environment..appreciate the help -----Original Message----- From: Thomas Anders [mailto:thomas.and...@blue-cable.de] Sent: Sunday, September 05, 2010 1:52 AM To: net-snmp-users@lists.sourceforge.net Subject: Re: : RE: net-snmp 5.2.X compilation errors in QNX Momentics 6.3.0 Ali Mirza, Rashid wrote: > I downloaded net-snmp 5.6 rc2 and did a configure on the qnx machine. After > that did a make, and it seems it never finishes the make, and is in a loop, > as I keep getting the questions for the snmp version and default location > after its done a set of make steps. In fact it does the same when I do a make > install. > Any help would be great. You may either use "configure ... --with-defaults" to use defaults for the prompted values or specify the options (e.g. "--with-default-snmp-version=2") individually to circumvent the prompts. +Thomas ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users This transmission is intended solely for the person or organization to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify us immediately by e-mail at i...@salik.ae ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
