On 21 December 2010 16:27, aravind narasimhan <aravin...@gmail.com> wrote:
> createUser public MD5 public123
> rwuser public
If you've got the settings above, then these are sufficient.
You don't need the following block:
> com2sec public default public
> #com2sec public default public
> group mygroup v1 public
> group mygroup v2c public
> group mygroup usm public
> view all included .1.3.6.1.4.1.2021
> access mygroup "" any noauth exact all none none
They won't be used for SNMPv3 requests at all.
> to the agent with the above config
> I tried adding context based on an earlier e-mail thread as below.
> com2sec –Cn ucd public default public
a) That sets up a context for SNMPv1/2c requests
It has no effect on SNMPv3 requests
b) You would also need to change the MIB module code
to *register* the information in another context.
Just tweaking the config file is not sufficient.
Contexts are almost certainly not the solution here.
Dave
------------------------------------------------------------------------------
Forrester recently released a report on the Return on Investment (ROI) of
Google Apps. They found a 300% ROI, 38%-56% cost savings, and break-even
within 7 months. Over 3 million businesses have gone Google with Google Apps:
an online email calendar, and document program that's accessible from your
browser. Read the Forrester report: http://p.sf.net/sfu/googleapps-sfnew
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
