Hi, I am running net-snmp 5.6.1. I have my properietary MIB which I load as a dynamic module. The standard MIB modules are built into the agent.
I start the snmp daemon by : /usr/sbin/snmpd -Lsd -Lf /dev/null -p /var/run/snmpd.pid After that I dynamically load the proprietary mib module. I am able to access the standard MIB objects as well as my proprietary mib objects. The things are fine upto this point. But if I leave snmpd for some time (1 hour) and then go for accessing the mib objects(standard as well as proprietary), the snmpget or walk request time out. It is weird. I did "ps -eaf" to check the snmpd . It was there. I had an impression that some other process has killed it. But it was present . Any idea what is going wrong here ? I have noticed this problems multiple times. killing and restarting snmpd make the agent to respond again. Have somebody experienced this problem before ? Regards, Sunaina ------------------------------------------------------------------------------ Fulfilling the Lean Software Promise Lean software platforms are now widely adopted and the benefits have been demonstrated beyond question. Learn why your peers are replacing JEE containers with lightweight application servers - and what you can gain from the move. http://p.sf.net/sfu/vmware-sfemails _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
