I'm using the embedded perl links to run a handler (specifically one from
Zabbix) for traps. Running Ubuntu's packaged 5.7.3 version on Ubuntu 15.10.
For certain traps (well, one so far) the translation is not occurring as
expected, and differs from snmptranslate.
Example: snmptranslate -Dinit_mib 1.3.6.1.4.1.9.9.171.2.0.8
This gives the answer I expected:
registered debug token init_mib, 1
init_mib: Seen MIBDIRS: Looking in
'/usr/share/snmp/mibs:/var/lib/mibs/cisco:/var/lib/mibs/iana:/var/lib/mibs/ietf'
for mib dirs ...
init_mib: Seen MIBS: Looking in
':SNMPv2-MIB:IF-MIB:IP-MIB:TCP-MIB:UDP-MIB:HOST-RESOURCES-MIB:NOTIFICATION-LOG-MIB:DISMAN-EVENT-MIB:DISMAN-SCHEDULE-MIB:HOST-RESOURCES-TYPES:MTA-MIB:NETWORK-SERVICES-MIB:UCD-DISKIO-MIB:UCD-DLMOD-MIB:LM-SENSORS-MIB:UCD-SNMP-MIB:UCD-DEMO-MIB:SNMP-TARGET-MIB:NET-SNMP-AGENT-MIB:SNMP-MPD-MIB:SNMP-USER-BASED-SM-MIB:SNMP-FRAMEWORK-MIB:SNMP-VIEW-BASED-ACM-MIB:SNMP-COMMUNITY-MIB:IPV6-ICMP-MIB:IPV6-MIB:IPV6-TCP-MIB:IPV6-UDP-MIB:IP-FORWARD-MIB:NET-SNMP-PASS-MIB:NET-SNMP-EXTEND-MIB:SNMP-NOTIFICATION-MIB:SNMPv2-TM:NET-SNMP-VACM-MIB:CISCO-IPSEC-FLOW-MONITOR-MIB'
for mib files ...
init_mib: Seen PREFIX: Looking in '.1.3.6.1.2.1' for prefix ...
CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecTunnelStop
But the snmptrapd output:
SNMPv2-MIB::snmpTrapOID.0 type=6 value=OID:
SNMPv2-SMI::enterprises.9.9.171.2.0.7
This has been formatted by the perl script, but not translated. For
I am running snmptrapd using these settings:
/etc/default/snmptrapd:
TRAPDOPTS='-OS -t -p /run/snmptrapd.pid'
I do not believe there are other config options affecting it. I can change the
OID presentation with the -O in that file so it seems "connected". In addition
I specify mibs in /etc/default/snmp
mibdirs
/usr/share/snmp/mibs:/var/lib/mibs/cisco:/var/lib/mibs/iana:/var/lib/mibs/ietf
mibs +CISCO-IPSEC-FLOW-MONITOR-MIB
The last line explicitly adds the MIB in which this OID is found.
The two symbolic representations both appear to yield the same numeric value,
indeed the snmpwalk will turn one into the other (I realize it should not
retrieve it, it is the translation I am looking at:
# snmpwalk -v2c -cRedacted 10.200.14.1 SNMPv2-SMI::enterprises.9.9.171.2.0.7
CISCO-IPSEC-FLOW-MONITOR-MIB::cipSecTunnelStart = No Such Object available on
this agent at this OID
So my GUESS is that my problem is sequence of MIB's. There's a -PR option
documented to reverse the order, but this does not work as an SNMPTRAPD option
(and frankly I'm not sure reversing is right, as it might cause additional
issues with other MIB's).
Is there an appropriate way to force this, to use this mib first perhaps (but
not reverse all of them), or....
My goal is to get more human readable values in the traps. I realize
ultimately I could process it in either form, or just in a numeric form, but
humans are more picky.
Thanks in advance for any advice. Maybe I'm just approaching this incorrectly.
Linwood
------------------------------------------------------------------------------
Mobile security can be enabling, not merely restricting. Employees who
bring their own devices (BYOD) to work are irked by the imposition of MDM
restrictions. Mobile Device Manager Plus allows you to control only the
apps on BYO-devices by containerizing them, leaving personal data untouched!
https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
