Hi
Ok, so my configure command is now:
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
--libdir=/usr/lib --host=arm-v5te-linux-gnueabi
--build=i686-host-linux-gnu --enable-ipv6 --with-defaults
--with-openssl=internal --with-mib-modules=agentx,ucd_snmp,snmpv3mibs
--with-mibs --with-logfile=/var/log/snmpd.log
--with-persistent-directory=/var/net-snmp
--with-default-snmp-version=3 --enable-shared --enable-internal-md5
--with-endianness=little --enable-agentx-dom-sock-only --enable-agent
--enable-mibs --enable-snmpv1 --enable-snmpv2c --enable-snmpv3
--enable-des --enable-md5 --enable-sha1 --enable-aes
--enable-snmptrapd-subagent --enable-mib-config-checking
--enable-mfd-rewrites --disable-embedded-perl --without-perl-modules
--disable-testing-code --disable-developer
I get this at end of config command:
configure: WARNING: unrecognized options: --enable-snmpv3, --enable-sha1,
--enable-aes
---------------------------------------------------------
Net-SNMP configuration summary:
---------------------------------------------------------
SNMP Versions Supported: 1 2c 3
Building for: linux
Net-SNMP Version: 5.7.3
Network transport support: Callback Unix Alias TCP UDP TCPIPv6 UDPIPv6
IPv4Base SocketBase TCPBase UDPIPv4Base UDPBase IPv6Base
SNMPv3 Security Modules: usm
Agent Module list: mk/module_list_code.mk
Agent MIB code: agentx default_modules snmpv3mibs ucd_snmp =>
agentx/master agentx/subagent snmpv3mibs mibII ucd_snmp notification
notification-log-mib target agent_mibs agentx disman/event disman/schedule
utilities host snmpv3/snmpMPDStats_5_5 snmpv3/usmStats_5_5
snmpv3/snmpEngine snmpv3/usmConf snmpv3/usmUser ucd-snmp/disk_hw
ucd-snmp/proc ucd-snmp/versioninfo ucd-snmp/pass ucd-snmp/pass_persist
ucd-snmp/loadave agent/extend ucd-snmp/errormib ucd-snmp/file
ucd-snmp/dlmod ucd-snmp/proxy ucd-snmp/logmatch ucd-snmp/memory
ucd-snmp/vmstat
MYSQL Trap Logging: unavailable
Embedded Perl support: disabled
SNMP Perl modules: disabled
SNMP Python modules: disabled
Crypto support from: internal
Authentication support: MD5 SHA1
Encryption support: DES AES
Local DNSSEC validation: disabled
But when i execute command: net-snmp-config --config-options
I get only this line: '--with-perl-modules'
?
Best regards,
Marko
On Tue, Jul 19, 2016 at 9:12 AM, Pushpa Thimmaiah <
pushpa.thimma...@gmail.com> wrote:
> Hi
>
> Paste result of 'net-snmp-config --config-options' .
> Also add snmpv3mibs in option --with-mib-modules and recompile.
>
>
> Thanks
> Pushpa.T
>
> On Thu, Jul 14, 2016 at 4:24 PM, Marko Vucak <vucakma...@gmail.com> wrote:
>
>> Hi
>>
>>
>>
>> Having some problems with encryption.
>>
>>
>>
>> I downloaded latest version: net-snmp-5.7.3
>>
>>
>>
>> Then configured it with command:
>>
>> *./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
>> --libdir=/usr/lib --host=arm-v5te-linux-gnueabi --build=i686-host-linux-gnu
>> --enable-ipv6 --with-defaults --with-openssl=internal
>> --with-mib-modules=agentx,ucd_snmp --with-mibs
>> --with-logfile=/var/log/snmpd.log --with-persistent-directory=/var/net-snmp
>> --with-default-snmp-version=3 --enable-shared --enable-internal-md5
>> --with-endianness=little --enable-agentx-dom-sock-only --enable-agent
>> --enable-mibs --enable-snmpv1 --enable-snmpv2c --enable-snmpv3 --enable-des
>> --enable-md5 --enable-sha1 --enable-aes --enable-snmptrapd-subagent
>> --enable-mib-config-checking --enable-mfd-rewrites --disable-embedded-perl
>> --without-perl-modules --disable-testing-code --disable-developer*
>>
>>
>>
>> Net-SNMP configuration summary said:
>>
>> Authentication support: MD5 SHA1
>>
>> Encryption support: DES AES
>>
>>
>> Then I made snmpd with make command.
>>
>>
>>
>> When I execute command: snmpd -H 2>&1 | grep defPrivType
>>
>> I get: defPrivType DES (AES support not available)
>>
>>
>>
>> Why no support for AES when it was OK in configure?
>>
>>
>>
>>
>> I have following snmpd.conf
>>
>>
>> master agentx
>>>
>>>
>>>> #Network hint
>>>>
>>> com2sec local localhost public
>>>
>>> com2sec mynetwork 169.254.1.0/24 public
>>>
>>>
>>>> #create views
>>>
>>> view all included .1
>>>
>>>
>>>> # Add user
>>>
>>> createUser myUser MD5 "12345678" DES abcdef
>>>
>>> rwuser myUser
>>>
>>>
>>>> #ReadWrite group
>>>
>>> group MyRWGroup usm local myUser
>>>
>>>
>>>> # For ALL_ACCESS view
>>>
>>> access MyRWGroup "" usm auth exact all all all
>>>
>>>
>> Here, on command: *snmpd -H *i get error: *Unknown privacy protocol *
>> Why? When DES is enabled.
>> Is something wrong with my configuration?
>>
>>
>> ------------------------------------------------------------------------------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>> traffic
>> patterns at an interface-level. Reveals which users, apps, and protocols
>> are
>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>> planning
>> reports.http://sdm.link/zohodev2dev
>> _______________________________________________
>> Net-snmp-users mailing list
>> Net-snmp-users@lists.sourceforge.net
>> Please see the following page to unsubscribe or change other options:
>> https://lists.sourceforge.net/lists/listinfo/net-snmp-users
>>
>>
>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
