On Tue, Jun 27, 2017 at 11:37 AM, <corvace.fabri...@libero.it> wrote:
> Thank you so much for the reply, the command i'm using is the following:
>
> snmpset -v 2c -c public "IP" "OID" = -100
>
> Watching the data over wireshark tho, the data length for that command is
> 1.
>
> But if i send for example -130 i get a data length of 2.
>
Yes, that is correct behavior. What is the problem?
Bill
> Il 27 giugno 2017 alle 16.51 Bill Fenner <fen...@gmail.com> ha scritto:
>
> On Thu, Jun 22, 2017 at 10:37 AM, corvace.fabrizio--- via Net-snmp-users <
> net-snmp-users@lists.sourceforge.net> wrote:
>
> Hello,
>
> I'm currently struggling with a data problem.
>
> I have a system where i have to SET a value, the value is of type Integer
> (-32768.32767).
>
> When sending a value over 255 i have no problem with sign, if i scan with
> wireshark i see a transmission of ASN type 2(Integer) with 2 bytes of data,
> and the data is correctly sent with sign.
>
> But whenever i try to send a value that is less that 256, therefore fits
> in a byte, the transmission is still of type 2, but it sends out one single
> byte of data, thus cutting out the range from -129 to -255 and from +128 to
> +255.
>
> I would have thought that since the OID is of type Integer (explicitly
> 16bit) the data would still have been sent as 2bytes.
>
> BER encoding is variable length, no matter what the restrictions on the
> range of the integer - restrictions like that are managed at a higher layer.
>
> As you surmise, the BER encoding of values from -129 to -255 and +128 to
> +255 are two bytes long.
>
> I tried looking for a way of forcing 2 byte data send, but with no luck.
> Am i missing something?
>
> How are you sending your data? I do not know of a way to force net-snmp
> to behave in this incorrect way.
>
> Bill
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
