Hi All,
My device interface (eth5) has both ipv4 and ipv6. Does ifIndex same for
both IPv4 and IPv6 address ?
---- ipAddressIfIndex------------------------------
IP-MIB::ipAddressIfIndex.ipv4."172.168.7.200" = INTEGER: 3 <------ifIndex
of eth5 IPv4 address = 3
IP-MIB::ipAddressIfIndex.ipv4."172.168.7.255" = INTEGER: 3
IP-MIB::ipAddressIfIndex.ipv4."127.0.0.1" = INTEGER: 1
IP-MIB::ipAddressIfIndex.ipv6."00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:01"
= INTEGER: 1
IP-MIB::ipAddressIfIndex.ipv6."20:09:00:00:00:00:00:00:00:00:00:00:00:00:20:71"
= INTEGER: 3 <-- ifIndex of eth5 IPv6 Addresses = 3
IP-MIB::ipAddressIfIndex.ipv6."33:31:0d:b8:00:00:00:01:00:00:00:00:00:00:01:00"
= INTEGER: 3
--------ifIndex and ifDescr-----------------------------
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3 <---- eth5
IF-MIB::ifIndex.11 = INTEGER: 11
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth7
IF-MIB::ifDescr.3 = STRING: eth5 <---- ifIndex of eth5 = 3
IF-MIB::ifDescr.11 = STRING: eth5.2
Thank you,
Pushpa.T
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
