Hi Elie, In my comprehension of SNMP, I use snmpwalk to get all the" leaves" of a "branch" (and "under-branches"), and snmpget to get a specific "leave" of a branch.
So snmpwalk localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115 make not really sense, or am I wrong ? I think you should either Snmpwalk localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo Or Snmpget localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115 What do you expect to get returned by an Snmpwalk localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115 Best regards JM De : Elie Elia [mailto:elia...@gmail.com] Envoyé : jeudi, 24. janvier 2019 14:49 À : net-snmp-users@lists.sourceforge.net Objet : snmpwalk problem Hi Team, I am having a problem when retrieving the value of dynamic counters having an index greater than 114 as shown below on my Linux box snmpwalk -v2c -c public localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115 jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115: Unknown Object Identifier (Index out of range: 115 (name)) While if i perform the same command on an index lower than 115 the value is properly returned snmpwalk -v2c -c public localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.111 JINNY-JAR-MIB::smppsir-dlvmo.111 = Counter32: 0 The related part of the MIB is the following: -- JAR- SMPP SI RX dynamic counters smppsirTable OBJECT-TYPE SYNTAX SEQUENCE OF SMPPSIREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { jar 60 } smppsirEntry OBJECT-TYPE SYNTAX SMPPSIREntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { name } ::= { smppsirTable 1 } SMPPSIREntry ::= SEQUENCE { name OCTET STRING, smppsir-bndrx Counter, smppsir-bndrx-a Counter, smppsir-dlvmo Counter, smppsir-dlvmo-a Counter, smppsir-dr Counter, smppsir-dr-a Counter, smppsir-alive Gauge, smppsir-slink Counter, smppsir-slink-a Counter, smppsir-rlink Counter, smppsir-rlink-a Counter, smppsir-dmo-ack Counter, smppsir-dr-ack Counter, smppsir-dr-dlv Counter, smppsir-dr-udlv Counter } name OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) ACCESS not-accessible STATUS mandatory DESCRIPTION "The dynamic name of the counter" ::= { smppsirEntry 2 } smppsir-bndrx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total receiver binds" ::= { smppsirEntry 3 } smppsir-bndrx-a OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total receiver binds (ack)" ::= { smppsirEntry 4 } smppsir-dlvmo OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Received MO messages" ::= { smppsirEntry 5 } smppsir-dlvmo-a OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total Received MO messages (ack)" ::= { smppsirEntry 6 } If we run the snmpwalk to retrieve all the dlvmo counters values all the counters are displayed even the ones having an index higher than 114 snmpwalk -v2c -c public localhost jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo JINNY-JAR-MIB::smppsir-dlvmo.1 = Counter32: 0 JINNY-JAR-MIB::smppsir-dlvmo.2 = Counter32: 0 JINNY-JAR-MIB::smppsir-dlvmo.3 = Counter32: 0 JINNY-JAR-MIB::smppsir-dlvmo.4 = Counter32: 0 JINNY-JAR-MIB::smppsir-dlvmo.5 = Counter32: 0 ... ... JINNY-JAR-MIB::smppsir-dlvmo.118 = Counter32: 0 JINNY-JAR-MIB::smppsir-dlvmo.119 = Counter32: 19136 JINNY-JAR-MIB::smppsir-dlvmo.120 = Counter32: 38025 JINNY-JAR-MIB::smppsir-dlvmo.121 = Counter32: 113871 JINNY-JAR-MIB::smppsir-dlvmo.122 = Counter32: 190952 ... ... Thus the problem is only when trying to retrieve dynamic counters with index greater than 114 The server has SNMP version 5.3.2.2 snmpwalk -V NET-SNMP version: 5.3.2.2 Can you advice concerning this problem Thanks in advance.
_______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
