Simon,
What does your 'address' line in snmpd.conf look like?
Based on the error message, are you sure you have all MIBs needed,
loaded? Try say the device description OID, or the System Up Time OID.
Just as validation, a suggestion. The communication seems good, just
the OID rejected?
-DD
On 03/17/2021 11:19, Simon Chamlian wrote:
Hi,
Seems like v1/v2 is blocked while v3 works fine.
*V3 works Fine*
# snmpget -v 3 -u Simon -a MD5 -A simon123 -l authNoPriv localhost
NEM-DCI-MIB::nemDCISnmpTrapPort.0
NEM-DCI-MIB::nemDCISnmpTrapPort.0 = INTEGER: 162
*V1/V2 does not work*
# snmpget -v 2c -c public localhost NEM-DCI-MIB::nemDCISnmpTrapPort.0
NEM-DCI-MIB::nemDCISnmpTrapPort.0 = No Such Object available on this
agent at this OID
# snmpget -v 1 -c public localhost NEM-DCI-MIB::nemDCISnmpTrapPort.0
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: NEM-DCI-MIB::nemDCISnmpTrapPort.0
*The config file I have is:*
createUser Simon MD5 "simon123"
rwuser Simon
# rocommunity: a SNMPv1/SNMPv2c read-only access community name
rocommunity public
# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
rwcommunity private
Any clues on why this is happening?
Thanks,
Simon
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users