At 12:37 07.03.99 -0800, Thierry de Villeneuve wrote:
>Hello. I'm new to the list and haven't find (yet) archives on posters on the
>same subject. I'm sorry to to repost the following.
>
Hi hi,
>Problems:
>
> 1/ server won't show in chooser, but can be called giving IP/name
> 2/ private network freeze, as well as Mac, for few seconds every
> few minutes.
>
>---
>
>I'm running Netatalk on a multi homed Linux box with RedHat 5.2, kernel
>2.0.36, netatalk1.42b_asun2.1.6
Whow, you are faster then Adrian. The latest release I got today was pre-
asun-2.1.4 ;-)))))))))))
>
> eth0 goes to my cable modem through DHCP
> eth1 goes to my private network - 192.168.1.0
>
>I'm running named on the box authoritative on my private net.
>
>AppleVolumes.default contains 2 lines
>~ Home
>/home/atalk "My share"
That�s fine...
>I type into atalkd.conf only "eth1". Later, it gets rewritten with "phase",
>"net" and "addr". There is no way I can set up any zone name as atalkd.conf
>docs says.
>
>How can I set up a Zone name ?
Why do you want zones? You need zones to set up routing (AppleTalk ones -
not IP)
between different networks. Do you want to make your network public? (I
don�t think
so ;--)))) Since one of the last asun releases we have multiple zones on
one interface.
I don�t know how to set them up (maybe with nbprgstr - does anybody know?).
>---
>
>When atalk gets started it picks up the hostname from eth0 (the way I let my
>DHCP connection to let go).
You can set up the name netatalk uses manually - look in your startup script
"atalk" and change the part in witch hostname gets called. (This is one of the
solutions).
>My problem is that no server shows up in the chooser of my Mac on my private
>net.
>If I enter the server's address I get the share showing up and I can mount a
>volume.
So you have AppleTalk over IP but no EtherTalk...
>note: I can indistinctively call the server by either it's name on eth0 or
>its name on eth1.
That�s was named does...
Named gets your local name by your definition and the public one by the
name server of you ISP (ok, this could be one answer - DNS is complex).
>Later, my eth1 network is locked up for a few seconds every minute or so. IT
>freezes the Mac.
????
Try the rest of my advises - maybe it goes away ;----)))))))))))
Maybe you should concern to make you privat network eth0 (it�s yours and it
should be the first on ;----))).
>Unmounting any network volume, not shuttong down atalkd won't stop this. I
>have to rebooot the gateway/server.
Why do you have to restart the server? Do the Macs still freeze after you�ve
restarted them??
Could be a problem with the network card. Check also the remark at the end
of this mail.
>My /var/log/messages goes like this (see bottom of mail):
>
>Is there anything a "trained eye" can spot into this that could help me?
> - I wonder about the "*" in "dt043n66:AFPServer@*"
> - I wonder I may have problem with the fact my box is dual homed and atalkd
>picking up the wrong interface's name.
I�m running a couple of boxes like this but with ISDN and not cable-modems.
The message you get is just the info that netatalk registered itself as AFP
Server
(File Server) with the given name and on no zone ("@*"). The name is not the
problem (you can pass any name to netatalk). Maybe netatalk advertises itself
on eth0.
>
>
>That makes a lot of questions.
>
> Any help, URL, trick will be welcomed.
Try this:
1. Set your name manually in script atalk.
2. atalk.conf (created by atalkd):
just leave the eth1... line a add "-seed" after "eth1 ". remove eth0 line.
3. afpd.conf
---
"BigMac" -transall -address <IP-Address of you Linux box - private side>
---
>Thanks,
>Thierry
>
>
>
>11:54:11 kernel: Appletalk 0.17 for Linux NET3.035
>11:54:11 atalkd[473]: restart (1.4b2+asun2.1.2)
>11:54:12 atalkd[473]: zip_getnetinfo for eth1
>11:54:31 last message repeated 2 times
>11:54:41 atalkd[473]: config for no router
>11:54:42 atalkd[473]: ready 0/0/0
>11:54:54 papd[484]: restart (1.4b2+asun2.1.2)
>11:55:01 afpd[493]: dt043n66:AFPServer@* started on 65280.207:128
>11:55:01 afpd[493]: ASIP started on 204.210.30.102:548(1) (1.4b2+asun2.1.2)
>11:55:50 afpd[494]: ASIP session:548(1) from 192.168.1.50:2067(2)
>11:55:50 afpd[493]: server_child[1] 494 done
>11:55:54 afpd[495]: ASIP session:548(1) from 192.168.1.50:2068(2)
>11:55:54 afpd[495]: login noauth
>12:13:30 dhcpcd[157]: got in RENEWING state
>12:13:30 dhcpcd[157]: got in BOUND state
>12:13:52 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:13:52 kernel: eth1: Trying to restart the transmitter...
>12:15:24 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:15:24 kernel: eth1: Trying to restart the transmitter...
>12:18:07 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:07 kernel: eth1: Trying to restart the transmitter...
>12:18:08 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:08 kernel: eth1: Trying to restart the transmitter...
>12:18:13 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:13 kernel: eth1: Trying to restart the transmitter...
>12:18:25 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:25 kernel: eth1: Trying to restart the transmitter...
>12:18:28 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:28 kernel: eth1: Trying to restart the transmitter...
>12:18:31 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:31 kernel: eth1: Trying to restart the transmitter...
>12:18:38 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:38 kernel: eth1: Trying to restart the transmitter...
>12:18:40 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:18:40 kernel: eth1: Trying to restart the transmitter...
Do you have an Intel EtherExpress (Pro)?!!!!!!!!!
Check out for a new driver (at cesdis) and(/or???) apply the following patch:
(or us a tulip based card ;--)))))
----------------------------------------------------------------------------
--------------------------------
On Thu, 25 Feb 1999, Michael H. Martel wrote:
> I'm running RedHat 5.2 on an intel Celeron 333 w/Intel EtherExpress Pro
> 10/100 card. When I fire up the latest version from a sun I get the
> following message :
>
> eth0: Transmit timed out: Status 0050 Command 0000.
> eth0: Trying to restart the transmitter ...
Add this line to your /etc/conf.modules file, reboot, and all should be
well:
options eepro100 multicast_filter_limit=3
The 1.0.3 eepro driver that ships with RH 5.2 doesn't support multicast
properly.
-Jamie
----------------------------------------------------------------------------
--------------------------------
>12:19:29 afpd[495]: logout
>12:19:29 afpd[495]: 1.59KB read, 2.43KB written
>12:19:29 afpd[493]: server_child[1] 495 done
>12:29:29 kernel: eth1: Transmit timed out: status 0050 command 0000.
>12:29:29 kernel: eth1: Trying to restart the transmitter...
>12:31:55 afpd[493]: shutting down on signal 15
>12:31:55 dt3n66 atalkd[473]: done
>
>
>=== eom =============================================================
>Thierry de Villeneuve San Diego, CA 92128
>home e-mail [EMAIL PROTECTED] voice +1 (619) 679-3366
>prof e-mail [EMAIL PROTECTED] fax +1 (619) 679-3395
>http://users.abac.com/thierryv/ http://www.efsd.org/
Good luck...
Sascha Knific
