On Tue, Sep 10, 2013 at 09:42:40AM +0000, Nick LaForge wrote:
> What is puzzling is: if the performance loss is not likely to be related to
> any filesystem implementation / option, one logical hypothesis is that the
> partitions are not aligned to 4k blocks, but this has already been
> falsified by booting Linux and observing better performance for the exact
> same ext2 partition.
I'm not sure that NetBSD's ext2 implementation has received as much
performance tuning as the ffs file-system. So you are better of comparing
NetBSD's ffs to a suitable Linux file-system e.g. ext3 or ext4.
> I can only think that the loss of performance is related to the NetBSD
> kernel's idea of the entire disk (/dev/wd0). E.g., dma is not being
> utilized, or maximum sata data rates are not taken advantage of, etc. This
> is also strange, since the machine is not new (it is from 2009).
The kernel message you provided suggests that DMA is used:
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
DMA)
You could however try to change the BIOS settings and configure the
SATA ports to use AHCI mode.
Kind regards
--
Matthias Scheler http://zhadum.org.uk/
