Maurizio Caloro <mau...@gmx.ch> wrote: >i running with Netbsd 6.0.1, and i have install Qemu 2.0 with one VM Server >installed with Microsft Srv, but i become (with dhcp) IP Adress 0.0.0.0. > >Syntax: >qemu-system-x86_64 -m 2048 -hda /usr/Srv2003.img -net nic,model=e1000 > >if running command without "net nic" i have a valid from Qemu-DHCP >Address 10.0.2.15/24 >here i can only ping me own address :-) > >bridge, and brconfig done but without success, me aspect are that me Windows >machine can ping from bothside me network and reach the internet. > >Please can you give me more help to see me misake? > >hp7900$ ifconfig -a >wm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > >capabilities=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx,TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6> > enabled=0 > address: 00:24:81:04:3e:0c > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet 192.168.0.103 netmask 0xffffffe0 broadcast 192.168.0.127 > inet6 fe80::224:81ff:fe04:3e0c%wm0 prefixlen 64 scopeid 0x1 >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33648 > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 >bridge0: flags=41<UP,RUNNING> mtu 1500 >tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > address: f2:0b:a4:81:1b:04 > media: Ethernet autoselect > inet 192.168.0.105 netmask 0xffffff00 broadcast 192.168.0.255 > inet6 fe80::f00b:a4ff:fe81:1b04%tap0 prefixlen 64 scopeid 0x4 > >hp7900$ brconfig -a >bridge0: flags=41<UP,RUNNING> > Configuration: > priority 32768 hellotime 2 fwddelay 15 maxage 20 > ipfilter disabled flags 0x0 > Interfaces: > tap0 flags=3<LEARNING,DISCOVER> > port 4 priority 128 > Address cache (max cache: 100, timeout: 1200):
You need to add wm0 to the bridge if you want the VM to be able to reach the internet. I think you will also want to give the VM a 192.168.0.x address, do you have a DHCP server running on your network ? Robert Swindells
