On Thu, 18 Dec 2014 20:58:24 +0000 Dave Tyson <[email protected]> wrote:
> I'll got a HP server running NetBSD 6.99.40 (amd64) with 2 pairs of > disks each configured as raid 1 mirrors. The first pair of disks has > three raid partitions arranged as mirrors on wd0 and wd1. [snip] > I noticed that raid2 (/dev/wd0f, /dev/wd1f) had a problem: There were > disk errors and /dev/wd0f was marked as failed. I decided to fail > /dev/wd0e and /dev/wd0a and replace the disk with an identical one > disklabeled as before. I rebuilt the three raids and rebooted. > > The raidsets raid1(/dev/wd0e, /dev/wd1e) and > raid2(/dev/wd0f, /dev/wd1f) were fine but raid0 had /dev/wd1a was now > marked as failed... this wasn't the disk that was replaced. > > If I reconstruct /dev/wd1a from /dev/wd0a then everything appears > fine, but after a reboot /dev/wd1a is marked as failed again. There > are no disk errors reported [snip] > Anyone got a clue how to fix this problem... What command are you using to reboot? The component labels should be already correct once the rebuild completes... Doing a 'raidctl -I 10 raid0' after the rebuild is done will force the component labels to be updated... but that shouldn't be needed... Later... Greg Oster
