On 07/15/15 19:39, Brett Lymn wrote:
On Wed, Jul 15, 2015 at 04:32:45PM -0453, William A. Mahaffey III wrote:
dump device configured. I have 6 swap partitions:
That seems a bit excessive - the days of "2 * physical RAM plus a bit"
for swap allocation has not been needed for quite some time. I guess in
the general scheme of things the amount of storage you have allocated
for swap is not much but, still, it really doesn't need to be that much
IMHO. Also, why are they not a raid? At the
moment if you lose a disk that hosts the swap chances are the machine
will go down.
Good questions. I have always heard that you get the best swasp
performance w/ the raw kernel driver (under SGI & linux), rather than
swapping to a RAID device. I have another box (Linux, FC14 64-bit) that
swaps to a RAID device, & it takes several min. to page in a few hundred
MB of paged-out-VM. That may be a linux only issue, but it is consistent
w/ my historical recollections. I have 96 GB of swap & 64 GB of RAM.
When fully operational the box may spend some time doing large CFD
calculations which exhaust that amount of RAM (pretty easy to do,
actually). The process should be able to continue, albeit more slowly,
which I will need. The swap devices are 1 slice on each of 6 HDD's, for
max parallelism & hopefully max performance. As soon as this machine is
fully up & running, I am going to redo the linux box to get rid of
swapping on a raid device (& allocate disk-space more usefully), & will
be going back to swapping on raw partitions due to crappy performance of
swap-on-raid on that box. The HDD's are brand new 2.5" drives, which I
have had good luck with historically, so I am hoping for more of the
same WRT HDD reliability vis-a-vis swapping (& other data partitions).
--
William A. Mahaffey III
----------------------------------------------------------------------
"The M1 Garand is without doubt the finest implement of war
ever devised by man."
-- Gen. George S. Patton Jr.