Hello Mayuresh, Mayuresh writes: > The relevant dmesg is: > > vendor 168c product 0036 (miscellaneous network, revision 0x01) at pci2 dev > 0 function 0 not configured > > Looks like this is not supported. I checked the GENERIC configuration of > the kernel and could not find something that commented relevant to this. > > For the same card Linux says, in case it helps: > > ath: phy0: WB335 1-ANT card detected > ath: phy0: Set BT/WLAN RX diversity capability > ath: phy0: Enable LNA combining > ath: phy0: ASPM enabled: 0x42 > ath: EEPROM regdomain: 0x6a > ath: EEPROM indicates we should expect a direct regpair map > ath: Country alpha2 being used: 00 > ath: Regpair used: 0x6a > ath3k: probe of 1-4.1:1.0 failed with error -12 > usbcore: registered new interface driver ath3k > > Is there any chance, this card would be supported on NetBSD?
It's an `Atheros AR9565' (if I'm reading src/sys/dev/pcidevls correctly!) and unfortunately at the moment it isn't supported neither by ath(4) nor by athn(4) (that's true for every AR>=9400). Last time that I've looked to them (I have an AR9485 on this laptop) athn(4) from OpenBSD didn't supported them. I think that FreeBSD's ath(4) support them though.