[as I'm not subscribed to this mailing list, I'd appreciate cc's of any
replies. TIA]
While I have no intention to install NetBSD on this particular machine,
I booted it as part of a test.
Enjoy (or weep).
--schaafuit.
boot wrote:
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 7.1 (GENERIC.201703111743Z)
> total memory = 510 MB
> avail memory = 485 MB
> WARNING: module error: module `cd9660' pushed by boot loader already exists
> kern.module.path=/stand/i386/7.1/modules
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> IBM 27223DG (Not Available)
> mainbus0 (root)
> ACPI: RSDP 0xf6d40 000024 (v02 IBM )
> ACPI: XSDT 0x1ff6e23a 00004C (v01 IBM TP-1P 00001140 LTP 00000000)
> ACPI: FACP 0x1ff6e300 0000F4 (v03 IBM TP-1P 00001140 IBM 00000001)
> ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32
> (20131218/tbfadt-634)
> ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32
> (20131218/tbfadt-634)
> ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or
> length: 0x000000000000102C/0x0 (20131218/tbfadt-664)
> ACPI: DSDT 0x1ff6e4e7 009968 (v01 IBM TP-1P 00001140 MSFT 0100000E)
> ACPI: FACS 0x1ff79000 000040
> ACPI: SSDT 0x1ff6e4b4 000033 (v01 IBM TP-1P 00001140 MSFT 0100000E)
> ACPI: ECDT 0x1ff77e4f 000052 (v01 IBM TP-1P 00001140 IBM 00000001)
> ACPI: TCPA 0x1ff77ea1 000032 (v01 IBM TP-1P 00001140 PTL 00000001)
> ACPI: BOOT 0x1ff77fd8 000028 (v01 IBM TP-1P 00001140 LTP 00000001)
> ACPI: All ACPI Tables successfully acquired
> cpu0 at mainbus0: Intel(R) Pentium(R) M processor 1300MHz, id 0x695
> acpi0 at mainbus0: Intel ACPICA 20131218
> acpi0: X/RSDT: OemId <IBM ,TP-1P ,00001140>, AslId < LTP,00000000>
> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
> LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
> LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
> LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
> LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
> LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
> LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
> LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
> LNKD: ACPI: Found matching pin for 2.0.INTA at func 0: 11
> LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11
> LNKA: ACPI: Found matching pin for 2.7.INTA at func 0: 11
> LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
> MEM (PNP0C01) at acpi0 not configured
> acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
> acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> SIO (PNP0C02) at acpi0 not configured
> attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> FPU (PNP0C04) at acpi0 not configured
> pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
> LPT (PNP0400) at acpi0 not configured
> acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
> acpibat0: sa~ssoni LION rechargeable battery
> acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
> acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
> thinkpad0 at acpi0 (HKEY, IBM0068)
> acpivga0 at acpi0 (VID): ACPI Display Adapter
> acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
> acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
> acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
> acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
> acpivga0: connected output devices:
> acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
> acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
> acpivga0: 0x0200 (acpiout2): TV, head 0
> acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0
> acpitz0 at acpi0 (THM0)
> acpitz0: levels: critical 97.0 C, passive 94.5 C, passive cooling
> apm0 at acpi0: Power Management spec V1.2
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
> (20131218/hwxface-646)
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
> (20131218/hwxface-646)
> attimer1: attached to pcppi1
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc1 (aux slot)
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3340 (rev. 0x03)
> agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3341 (rev. 0x03)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4c57 (rev. 0x00)
> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga0 not configured
> uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
> uhci0: interrupting at irq 11
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
> uhci1: interrupting at irq 11
> usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
> uhci2: interrupting at irq 11
> usb2 at uhci2: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
> ehci0: interrupting at irq 11
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
> usb3 at ehci0: USB revision 2.0
> ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x81)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled
> cbb0 at pci2 dev 0 function 0: vendor 0x104c product 0xac56 (rev. 0x00)
> ipw0 at pci2 dev 2 function 0: vendor 0x8086 product 0x1043 (rev. 0x04)
> ipw0: interrupting at irq 11
> ipw0: 802.11 address 00:04:23:81:d8:72
> ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> fwohci0 at pci2 dev 7 function 0: vendor 0x104c product 0x8026 (rev. 0x00)
> fwohci0: interrupting at irq 11
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:06:1b:00:20:09:71:d1
> fwohci0: Phy 1394a available S400, 1 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> ieee1394if0 at fwohci0: IEEE1394 bus
> fwip0 at ieee1394if0: IP over IEEE1394
> fwohci0: Initiate bus reset
> fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller
> (rev. 0x81)
> fxp0: interrupting at irq 11
> fxp0: May need receiver lock-up workaround
> fxp0: Ethernet address 00:06:1b:d3:19:22
> inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> cbb0: cacheline 0x8 lattimer 0x40
> cbb0: bhlc 0x24008
> cbb0: interrupting at irq 11
> cardslot0 at cbb0
> cardbus0 at cardslot0: bus 3
> pcmcia0 at cardslot0
> ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24cc (rev. 0x01)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> ichlpcib0: SpeedStep enabled
> piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M)
> (rev. 0x01)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at irq 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel interrupting at irq 15
> atabus1 at piixide0 channel 1
> ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x01)
> ichsmb0: interrupting at irq 11
> iic0 at ichsmb0: I2C bus
> auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
> auich0: interrupting at irq 11
> auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D
> stereo
> auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
> vendor 0x8086 product 0x24c6 (modem communications, revision 0x01) at pci0
> dev 31 function 6 not configured
> isa0 at ichlpcib0
> lpt2 at isa0 port 0x3bc-0x3bf irq : polled
> est0 at cpu0: Enhanced SpeedStep
> fwohci0: BUS reset
> fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
> ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
> ieee1394if0: bus manager 0
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
> audio0 at auich0: full duplex, playback, capture, mmap, independent
> acpiacad0: AC adapter online.
> uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> IPsec: Initialized Security Association Processing.
> wd0 at atabus0 drive 0
> wd0: <IC25N040ATMR04-0>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 35245 MB, 71609 cyl, 16 head, 63 sec, 512 bytes/sect x 72182773 sectors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 1202> cdrom
> removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
> Kernelized RAIDframe activated
> boot device: cd0
> root on cd0a dumps on cd0b
> root file system type: cd9660
> warning: no /dev/console
> acpibat0: normal capacity on 'charge state'
