netve...@gmail.com (Ron Georgia) writes: >When trying to mount I get the following: >sudo mount /dev/sd0a /mnt/sans/ >mount_ffs: /dev/sd0a on /mnt/sans: incorrect super block
>sudo mount -t msdos /dev/sd0a /mnt/sans/ >mount_msdos: /dev/sd0a on /mnt/sans: Invalid argument That probably says that there is no formatted filesystem, neither FFS (very likely) nor FAT (that would be common) on partition 'a'. >4 partitions: ># size offset fstype [fsize bsize cpg/sgs] > a: 30720000 0 4.2BSD 0 0 0 # (Cyl. 0 - 14999) > d: 30720000 0 unused 0 0 # (Cyl. 0 - 14999) >Partition table: >0: Primary DOS with 32 bit FAT - LBA (sysid 12) > start 2048, size 30922752 (15099 MB, Cyls 0-1924/249/53), Active >1: <UNUSED> >2: <UNUSED> >3: <UNUSED> That doesn't agree. While a FAT partition at block 2048 on a 16GB drive isn't that common, it's probably correct. A synthesized disklabel would match the MBR, so that one has probably been written to the USB drive. Can you try to erase the label with 'disklabel -D sd0' ? -- -- Michael van Elst Internet: mlel...@serpens.de "A potential Snark may lurk in every tree."