I am trying to create GPT partitions that are the same as the following:
# fdisk sd0
fdisk: Cannot determine the number of heads
Disk: /dev/rsd0
NetBSD disklabel disk geometry:
cylinders: 118152, heads: 64, sectors/track: 32 (2048 sectors/cylinder)
total sectors: 241975296, bytes/sector: 512
BIOS disk geometry:
cylinders: 1023, heads: 255, sectors/track: 63 (16065 sectors/cylinder)
total sectors: 241975296
Partitions aligned to 2048 sector boundaries, offset 63
Partition table:
0: Primary DOS with 32 bit FAT - LBA (sysid 12)
start 32768, size 163840 (80 MB, Cyls 2/10/9-12/60/48), Active
1: <UNUSED>
2: <UNUSED>
3: GPT Protective MBR (sysid 238)
start 1, size 32767 (16 MB, Cyls 0/0/2-2/10/8)
PBR is not bootable: Bad magic number (0x0000)
First active partition: 0
Drive serial number: 0 (0x00000000)
# gpt show sd0
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 32734 Unused
32768 163840 1 GPT part - Windows basic data
196608 33554432 2 GPT part - NetBSD FFSv1/FFSv2
33751040 207618048 3 GPT part - NetBSD FFSv1/FFSv2
241369088 606175 Unused
241975263 32 Sec GPT table
241975295 1 Sec GPT header
The complicating factor is that there is an MBR in sector 0 and the primary GPT
begins at sector 1.
I cannot figure out how to make the tools replicate this and would appreciate
help.
Thank you very much.
Cheers,
Brook
