On Sat, Jun 15, 2024 at 04:48:13PM +0200, Matthias Petermann wrote: > [ 1.343819] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class > 9/0, rev 2.00/1.00, addr 1 [..] > [ 2.413838] umass0 at uhub5 port 3 configuration 1 interface 0 > [ 2.413838] umass0: SanDisk (0x0781) Cruzer Blade (0x5567), rev > 2.00/1.00, addr 2 > [ 2.413838] umass0: using SCSI over Bulk-Only > [ 2.413838] scsibus0 at umass0: 2 targets, 1 lun per target > [ 2.423838] sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, > 1.00> disk removable
OK, can you add "options EHCI_DEBUG" to your kernel config, boot a new kernel and then do something like: break into ddb db> w ehci_debug=10 db> c and the shutdown When you see the HBA error, break into ddb again and show kernhist uvmhist If you can capture console output it is best to set $lines to 0 before doing that (the history printed will be looongish). (this is from memory, not sure if the names and syntax are exactly correct) Martin
