"J. Hannken-Illjes" <hann...@mailbox.org> wrote:
> Paul,
>
> I don't see an utun interface with address 10.2.0.X on the macOS Side. My
> macs with MacPorts wireguard have an interface like:
>
> utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1420
> inet 172.16.254.244 --> 172.16.254.244 netmask 0xfffffff0
>
> where 172.16.254.244 is the inside-tunnel address.
Ugh I'm a fool. I accidentally ran this while WireGuard was down.
Here's with WireGuard actually up:
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
anpi0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 32:81:29:1a:04:10
media: none
status: inactive
anpi1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 32:81:29:1a:04:11
media: none
status: inactive
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 32:81:29:1a:04:f0
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether 32:81:29:1a:04:f1
nd6 options=201<PERFORMNUD,DAD>
media: none
status: inactive
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:72:48:7c:ca:40
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=460<TSO4,TSO6,CHANNEL_IO>
ether 36:72:48:7c:ca:44
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 36:72:48:7c:ca:40
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 8 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 9 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
ap1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 52:91:5a:1a:42:6e
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (none)
status: inactive
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether e6:77:97:17:b7:70
inet6 fe80::10e0:2538:4bd1:c115%en0 prefixlen 64 secured scopeid 0xb
inet 10.0.0.30 netmask 0xffffff00 broadcast 10.0.0.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet6 fe80::e935:47f0:ab8f:346f%utun0 prefixlen 64 scopeid 0xd
nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::a7f7:6660:f35a:9eb4%utun1 prefixlen 64 scopeid 0xe
nd6 options=201<PERFORMNUD,DAD>
awdl0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether ea:bb:02:ef:ba:55
inet6 fe80::e8bb:2ff:feef:ba55%awdl0 prefixlen 64 scopeid 0xf
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=400<CHANNEL_IO>
ether ea:bb:02:ef:ba:55
inet6 fe80::e8bb:2ff:feef:ba55%llw0 prefixlen 64 scopeid 0x10
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (none)
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::d339:6b9b:7bce:8c12%utun2 prefixlen 64 scopeid 0x11
nd6 options=201<PERFORMNUD,DAD>
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
inet6 fe80::ce81:b1c:bd2c:69e%utun3 prefixlen 64 scopeid 0x12
nd6 options=201<PERFORMNUD,DAD>
utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::5368:e35c:6e05:aa2f%utun5 prefixlen 64 scopeid 0x14
nd6 options=201<PERFORMNUD,DAD>
utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
inet6 fe80::812b:b59e:1e0f:eb87%utun6 prefixlen 64 scopeid 0x15
nd6 options=201<PERFORMNUD,DAD>
utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1420
options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
inet 10.2.0.42 --> 10.2.0.42 netmask 0xffffff00
nd6 options=201<PERFORMNUD,DAD>
J., you have WireGuard working with macOS client -> NetBSD server??
That's encouraging if so.
Whereas yours is utun0, my WireGuard interface is utun4. I wonder
could that be anything to do with it? I, of course, do not know what
the majority of these interfaces are.
