'cdrecord blank=all' failed What do you see below?
gandalf# cdrecord blank=all dev=31,0,0 cdrecord blank=all dev=31,0,0 Cdrecord-ProDVD-ProBD-Clone 3.02 2022/08/18 (amd64-unknown-netbsd10.0.) Copyright (C) 1995-2019 Joerg Schilling scsidev: '31,0,0' scsibus: 31 target: 0 lun: 0 Using libscg version 'schily-0.9'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'ASUS ' Identifikation : 'DRW-24F1ST d ' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Starting to write CD/DVD/BD at speed 4 in real BLANK mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. On Thu, Jan 16, 2025 at 8:44 AM <ignat...@cs.uni-bonn.de> wrote: > > On Thu, Jan 16, 2025 at 08:18:56AM -0500, Todd Gruhn wrote: > > >>> may be cdrecord from console? > > > > > > I did. But I can not mount the disk. HMMMMMM... > > You probably need "cdrecord blank=all" (read the manpage about > blanking types) first before writing a completely new "session" (as > opposed to extending a pre-existing session). > > -is
