Hi all, I am having problems when quitting Microdot 2, Voyager, Genesis and the Netconnect Dock. The problem is rather intermittant, but most of the time when I quit the above apps I get "Recoverable Alert" "Error: A10000F.. ". The problem only seems to occur when Genesis is being run and the same time as the others (Voyager & MD2). I have tried disabling everything in the wbstartup drawer, and all patches started through the startup-sequence and user-startup all having no effect on eliminating the problem. I don't remember having the problem when using Nc2.2. As a test I re-installed NC2.0 from CD, and also reinstalled the MUI 3.8 using the standard installer. I didn't have any problems with Netconnect 2.0, 2.1 or 2.2. So after installing 2.0 > 2.1 > 2.2 > 2.3 I replaced the mcc's in my MUI/libs/mui/ drawer (that were installed from the nc2.3.lha archive by the installer) with the ones that were found in the 2.2 archive. I rebooted, but still the same problem occured. And oddly sometimes when starting Voyager for the first time after a boot-up, MUI opens a screen, but only part of the voayger window shows; namely the close gadget, sliders and the std amiga gadgets on the far top right hand side of the screen. This is starting to get annoying especially when I quit Md2 , while amftp is downloading a file, and md2 crashes the machine. After workbench manages to recover from the recoverable guru, the screen starts to get corrupted and eventually the machine crashes, or a reset is needed. I'm using the Super72 screenmode (800x600), have an A1200/030/50+50mhz fpu 32mb fastram, 3.2 quantum hd (recently installed within the last 2-3 months, I was thinking that it could possibly be the MaxTransfer value)). Can anyone recommend what steps to take to try and track down this problem? I using MD1.2 because the MD1.3 archive doesn't seem to be on the active web site atm. Cheers, Matthew Sampson -- Connected with Wirenet, the Uk's first Amiga only Internet Access Provider. _____________________________________________________________ NetConnect mailing list. To unsubscribe, send an 'unsubcribe' message to <[EMAIL PROTECTED]>
