Hello Ivan Roulson ([EMAIL PROTECTED]),
You wrote about "[netconnect] Hypercom & Voyager",
on 9 Jul 99 20:27:58 +0000.
> It seems there's a lot of bad air being produced over Hypercoms and
> Voyager. I have had a Hypercom 3Z in my A4000 for over a year without
> problem. Friends are amazed that a 25MHz machine can cope with the
> internet. Okay - I wish I could easily redirect the printer stuff
> directly through the hypercom without having to click "0" on the
> intercept software, but other than that, I'm happy.
It is probubly a new model than what I have. The problem with the
serial ports on some older hypercom1 and 3Z cards may actually be
caused by a differnt revision of the I/O chip used. This problem has
been identified by VMC and a minor rework to fix the problem should be
posted to their support site when available.
> Is there new software that might help me ;-)?
Yes, try using "prt42_50.lha" from Aminet it works of the 3Z's
parallel port here. All of my printing is done using this via the
3Z's parallel port. I don't have to redirect to the printer port
here.
My one program that would'nt work this way is "PageStream 2.2" this
could be re-directed to "PAR0" however which was setup using
"porthandler" which is included with the latest driver releases from
VMC.
A full commercial product that offers the same facilities as "prt42"
is "Turboprint". It offers more features for enchancing print quality
as well.
As you have a working 3Z can you tell me what the ID number is on the
square I/O chip?
Additionally what revision drivers are you using?
--
Jason Watson.
====================================================
Towerised A4K, WB3.1, CS-PPC 060-60 604-200 2+64MB,
CV-643D 4MB (CGfx4.1), 2.1GB IDE (PFS2), Atapi ZIP,
6x2x2 CD-RW (IDEFix97 3.4). Dynalink 33.6 Modem (NC v 2.3)
====================================================
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
