Hello Stephen T ([EMAIL PROTECTED]),
You wrote about "[netconnect] Re: NC 2 - Genesis fails to work",
on 17 Aug 99 00:30:44 +0100.
> I've a feeling that it may be something to do with MUI or one of its
> libraries or something. If I go to the MUI settings and select
> "NListViews", I get a "Suspend/Reboot" Error requestor.
Well NListviews has been know to cause problems with crashes if the
stack is set too low. Check the icons for the program crashing if
they use the NListViews modules. Here Genesis is set to use a
stack 32768 and GenesisPrefs and Wizard are set for 16384.
the same go's for the MUI prefs program, try increasing it.
What version of NListViews are you using becase about 12months ago I
was helping the author find the cause of the crashing problems I was
having with it. Oddly it only crashed in MUIPrefs. Here I am using:
NFloattext.mcc 19.46 (13.04.98)
NList.mcc 19.97 (31.11.98)
NListview.mcc 19.62 (02.11.98)
NListViews.mcp 19.61 (29.11.98)
To check just open a shell and type:
version nlist.mcc full [ENTER]
Obviosly changing the module name for each one you want to check.
If you are running older versions then I think you can find the latest
on the Vapor webite in the Misc folder. (I cannot remeber the
exact URL but it should'nt bet too hard too find). If you cannot find
the download then I probubly have them on a backup archive here on a
Zip disk.
> I'm be registering MUI soon, so hopefully that will solve the problem.
Maybe. But I would check the versions of the abouve first (Although I
haven't checked that the programs that are crashing actually use the
NList package at all. The MUIPrefs program crashing sounds like the
problem I was having though).
Good Luck.
--
Jason Watson.
===================================================
Towerised A4K, WB3.1, CS-PPC 060-60 604e-200 2+64MB,
CV64-3D 4MB (CGfx4.1), 2.1GB IDE (PFS2), Atapi Zip100,
6x2x2 CD-RW (IDEFix97 3.4). Dynalink 33.6 Modem (NC 2.3)
===================================================
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
