On 08-Oct-99, Michael Badger <[EMAIL PROTECTED]> wrote:
> Hello Tim
> Tim wrote:-
>>> Does anyone know if it's possible to connect to BT Click using Genesis
>>> or does it require some strange setup that's not supported? I tried to
>>> get it working using information gleaned from the TCP/IP settings for
>>> Dialup Networking under Win 95. It reports back a connect speed, but
>>> then goes offline saying:
>>>
>>> err: san2_online:could not put DEVS:Networks/apps.device, unit 0 online.
> Tony wrote:-
>> I usually get that when I'm short of memory or doing lots of other
>> things at the same time... It goes away if I reboot and start
>> again.
>
> I've had Tim's error come up after Genesis has got the details and it has
> left the ISP's Interface's 2nd. tab ( Sana-II) set wrong, I change this to
> PPP, save and it connects OK to UKOnline and Freenetname, but this may not
I've already got it set to this. At the moment I have it set up pretty much
the same as the other 3 ISPs (Wirenet, Free4All, In2Home) I use. The other
3 all worked fine with the Genesis Wizard. It started to work OK with BT
Click and then complained about an unknown response "Yes" or something
similar I can't remeber off of the top of my head. It may be a bit
confused, because you don't have a username and password with BT Click. I
then tried setting it up manually using the info out of dialup networking,
but somethings obviously not quite right.
> work with BT Click, but its easy enough to try.
>
> Regards, Michael.
Regards
--
Tim Greenaway
Email: [EMAIL PROTECTED], [EMAIL PROTECTED],
[EMAIL PROTECTED]
Web: http://www.bigfoot.com/~tGreenaway
ICQ: 34377633
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
