Chris Wiles once said:
>> Just a quick note concerning the problems I have had with NC3.
>You need to mail these to the NC ML, not to me personally.
OK, Thanks for that
>> The Octopus dockbar will not drag around the screen. Is it supposed
>> to? At the mo it sits bang smack in the middle of my screen and I
>> don't like that!
>Change to 'drag bar' in the prefs.
Done. It now works fine.
>> I can't open the settings from the menu item. Nothing happens when
I
>> select Octopus from the settings menu although it opens ok from its
>> dir icon.
It needs to be in progdir:
Not sure about this one:-( I have the Octopus prefs prog in both the
Sys:prefs directory and the NC3:progs/octopus directory but I still
can't open it from the Octopus menu. It does open OK from the Octopus
directory tho.
>> Whenever I tried to open the version of V that was installed by NC3
>>my
>NetConnect 3 Problems
==================
>It seems NetConnect 3 has a faulty version of Voyager 3, on the
>actual CD-Rom.
>To solve this problem you must download a new version of Voyager (ie.
>pre-release 4 or the soon to be released pre-release 5). To do this:
>1) Start the supplied mFTP-II (the NetConnect 3 FTP program)
>2) Log into ftp.vapor.com
>3) Go into pub/voyager
>4) Download the Voyager 3 pre-release 4 archive, extract and install.
Or V3pre5. It works fine as well:-)
>This version of Voyager 3 will work, in a full capacity, with your
>NetConnect 3 keyfile.
>Please note that any of the new Vapor releases (apart from AmTalk and
>AmigaNCP) will work, in a full capacity, with your NetConnect 3
>keyfile! So you can download the latest version of Voyager 3,
>mFTP-II, Microdot-II etc etc, install these on your system and they
>will work without any restrictions.
>You can download updates to WebVision on the Aminet -
>http://www.aminet.net - just search for 'webvision'.
>Try doing this and if you still have further problems, email
>[EMAIL PROTECTED] or, best of all, join the NetConnect mailing
>list and put any comments there!
I have now :-)
>Regards,
>Active Techologies.
>> Xarc
>>
>> Where has it gone? I really missed that so much so that I have had
>to
>> reinstall it from NC2 :-(
>X-Arc was never a part of NC 3 (doesn't anyone read the ad?!) and,
>think about it, it's on NC 2, so why do we need to supply the same
>program again...and again pay the author?
That one was only a question out of curiosity.
>ie. you don't need to delete NC 2 to install NC 3. It should have
>been on your hard drive, including X-Arc :)
Unfortunately I had to reinstall the lot as after I installed OS3.5 I
tried to repartition an existing part of my HD only to find that OS3.5
partitioned the whole lot. This meant that I had to use my 3.1 Install
disk to partition the drive back again. :-(
>Chris.
--
A la prochaine,
Dave Le Huray
Guernsey, Channel Islands
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
