> Unfortunately not having OS 3.5 I'm a bit stumped on this one.
>
> However I'd check your s:startup-sequence and s:user-startup files to
> see if there are any assigns that are getting in the way.
>
> Just a guess... probably wrong... but worth a try.
>
Actually you were quite correct. The version 42 printer.device I had
been using with 3.1 did a bit of messing around with PRT:
Many thanks
> Also, try "saving" a file directly to prt: to see if it prints - if it
> does so should MDII.
>
> -Bridge
>
> > Since upgrading to OS 3.5 I can no longer print from Microdot.
> >
> > According to Snoopdos it fails on PRT:
> >
> > Final Writer still prints ok and AWeb now prints ok from a 16/24bit
> > screenmode.
> >
> > When I print from Aweb it goes to my CanonBJ-EC prefs rather than PRT:
> >
> > The Canon driver I use came from the Canon web site, I don't use
> > Turboprint etc. With 3.1 I used a modified printer.device I got off
> > Aminet.
> >
> > Any suggestions
> >
> >
> >
> > --
> > Amiga A1200T(Power Tower), Blizzard PPC 603e+ 200mhz,
> > 68060 50mhz, 2+48mb RAM, BVision, 4.3gb 3.5" IDE HD,36*IDE CDROM,
> > 33600 Modem, Iiyama VM403, Micronic HD Floppy,Canon BJC-4100.
> >
> > _____________________________________________________________
> > NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> > message to <[EMAIL PROTECTED]>
> >
> >
>
> --
> http://www.mythicz.u-net.com | DT-MUD:sunsite.auc.dk:4242
> Amigan | Vegan | KOSHan - http://kosh.convergence.org
> Thanks to Olli for the NC2 MDII fix
> _____________________________________________________________
> NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> message to <[EMAIL PROTECTED]>
>
--
Amiga A1200T(Power Tower), Blizzard PPC 603e+ 200mhz,
68060 50mhz, 2+48mb RAM, BVision, 4.3gb 3.5" IDE HD,36*IDE CDROM,
33600 Modem, Iiyama VM403, Micronic HD Floppy,Canon BJC-4100.
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
