> On trying to run Microdot, the programme fails to load; Snoopdos
> states that Microdot is looking for 'PGPK', in either C: or local
> drawer; I thought that this might be a keyfile problem, so using a
> fresh partition, I re-installed the original NC2 CD, and then went
> through the stages above, but to no avail.
PGPK is the Pretty Good Privacy software that one can bolt onto MD2.
MD2 should work without it though (mine gives the PGPK fail in
snoopdos but still works without PGPK).
> I would appreciate it if you could suggest what might be wrong.
> I am using OS3.5, A1200 with '030 , if that makes a difference?
The hardware shouldn't (I have A1200 rev 1D4 with GVP68030@40mhz) but
the OS is a point - anyone know if there are compatibility problems
with OS3.5?
I'm using 3.0 and ok while I've had problems (and still am) I can
generally use MD2. Others have had less success and are in some cases
using OS3.5
> BTW Yes, I will upgrade to NC3, but I would feel more confident if I
> can get this working first.
MD2 is cool - although I'm thinking of getting a "good 'ole" text
based version of Elm or Pine and using that instead - very few bugs
and extremely quick (if a little unpretty).
-Bridge
--
http://www.mythicz.u-net.com | DT-MUD:sunsite.auc.dk:4242
Amigan | Vegan | KOSHan - http://kosh.convergence.org
Thanks to Olli for the NC2 MDII fix
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
