Hi Pietro, on Thu, 20 Apr 2000 at 11:50:34 you said: >Hello I'm Italian Amiga user and I recently bought NC3, the version of Voyager is >3.0.36 (with WB version command), when I lounch it the computer >crash. I tested it also on a plain configuration (see below), but nothing changed. >What can I do ? How i can have automatic update if i cannot launch >the program (the others work fine). You are obviuosly a newcomer to the list as this had been mentioned way back in the past. The version of V on the disk is corrupt. What you have to do is install it, this will give you the NC3 keyfile, and then obtain the latest version ,which is 3.2, from www.v3.vapor.com. You will also notice that Webvision doesn't work either. You will have to obtain the latest from Aminet or somewhere. Also there is an ongoing problem with the NC3 dockbar. Don't use it as it wipes program files. If possible use the one from NC2 (if you have it). Hope that helps and welcome to the list :-) -- A La Prochaine Dave Le Huray Guernsey, Channel Islands ICQ: 56195074 - - Surfing the Net with the speed of a Pentium - - - - - - - - On my 25Mhz Amiga 1200T :-) - - - - - - -- _____________________________________________________________ NetConnect mailing list. To unsubscribe, send an 'unsubcribe' message to <[EMAIL PROTECTED]>
