>
> Graham Mills said,
>
> > I (finally) made the jump to NC3 yesterday, and have noticed that when
> > I click on the 'To:' tab in a 'New Message' window, Contact Manager
> > opens, but whithout any of my contact addresses,
>
> > Am I right, is it broke and how do I fix it?
>
> After trying what others have suggested, you might want to try this:
> Due to the odd change in name from "CManager" to "Manager" for the
> directory name, myself and several other people saw a similar problem
> to you describe. One potential fix for it is to delete the
> "ENVARC:Vapor/CManager_path" file. Then, on a fresh boot, before
> running any other Vapor application, run the new Contact Manager
> program directly from Workbench by clicking its icon. Make sure its
> the new one not the old one. ;-)
>
> I should also point out that there have been a couple of CM updates
> since the one on the NC3 CD, I believe the latest is V1.8. You might
> want to install that before messing about getting it to work. You may
> well find that it works ok in the first place then, since the newer
> versions revert to the "CManager" dirname.
>
> Cheers,
>
> Ian
> ===
There might be an easier way to recover. The data is backed up as
/user/.data.BAK in the Manager (or CManager) directory. Simply copy
it and delete the "BAK". If you have recently installed the update,
look in the old one for a copy. It may not be as up to date but you
may be lucky.
--
Regards
George Bayliss
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
