Tony,
Two things you might check. First, if you boot from a floppy, it probably
does not have the file PFS2 in the L: directory and the OS will not be able
to use the PFS2 partitions. This is easily rectified by copying the file
across from your PFS2 program diskettes. Secondly, did you remember to
change the Tooltype in HDToolbox to use (I think) Oktascsi.device instead of
SCSI.device?
Having said that, I don't see why the Oktagon card will not boot up the old
disk regardless of the above. I do know that my Oktagon (4?) card refused to
allow the machine to boot at all with my old Cyberstorm Mk I accelerator,
although suppliers thought it ought to work!
Regards
Roy Leith
I used ExpertPrep, supplied with the accellerator to automount the
partitions, but, since then, the Oktagon hasn't been able to see the
IBM drive. It doesn't appear in the early boot screen, in HDToolBox
(or equivalent - and I've tried most of them) or on the WB Screen.
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
