On Mon, 2024-01-15 at 09:29 +0800, Zhu Yanjun wrote: > From: Zhu Yanjun <yanjun....@linux.dev> > > Some devices emulate the virtio_net hardwares. When virtio_net > driver sends commands to the emulated hardware, normally the > hardware needs time to response. Sometimes the time is very > long. Thus, the following will appear. Then the whole system > will hang. > The similar problems also occur in Intel NICs and Mellanox NICs. > As such, the similar solution is borrowed from them. A timeout > value is added and the timeout value as large as possible is set > to ensure that the driver gets the maximum possible response from > the hardware. > > " > [ 213.795860] watchdog: BUG: soft lockup - CPU#108 stuck for 26s! > [(udev-worker):3157] > [ 213.796114] Modules linked in: virtio_net(+) net_failover failover qrtr > rfkill sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency > intel_uncore_frequency_common intel_ifs i10nm_edac nfit libnvdimm > x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt rapl intel_pmc_bxt > dax_hmem iTCO_vendor_support vfat cxl_acpi intel_cstate pmt_telemetry > pmt_class intel_sdsi joydev intel_uncore cxl_core fat pcspkr mei_me > isst_if_mbox_pci isst_if_mmio idxd i2c_i801 isst_if_common mei intel_vsec > idxd_bus i2c_smbus i2c_ismt ipmi_ssif acpi_ipmi ipmi_si ipmi_devintf > ipmi_msghandler acpi_pad acpi_power_meter pfr_telemetry pfr_update fuse loop > zram xfs crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni > polyval_generic ghash_clmulni_intel sha512_ssse3 bnxt_en sha256_ssse3 > sha1_ssse3 nvme ast nvme_core i2c_algo_bit wmi pinctrl_emmitsburg > scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_multipath > [ 213.796194] irq event stamp: 67740 > [ 213.796195] hardirqs last enabled at (67739): [<ffffffff8c2015ca>] > asm_sysvec_apic_timer_interrupt+0x1a/0x20 > [ 213.796203] hardirqs last disabled at (67740): [<ffffffff8c14108e>] > sysvec_apic_timer_interrupt+0xe/0x90 > [ 213.796208] softirqs last enabled at (67686): [<ffffffff8b12115e>] > __irq_exit_rcu+0xbe/0xe0 > [ 213.796214] softirqs last disabled at (67681): [<ffffffff8b12115e>] > __irq_exit_rcu+0xbe/0xe0 > [ 213.796217] CPU: 108 PID: 3157 Comm: (udev-worker) Kdump: loaded Not > tainted 6.7.0+ #9 > [ 213.796220] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, > BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022 > [ 213.796221] RIP: 0010:virtqueue_get_buf_ctx_split+0x8d/0x110 > [ 213.796228] Code: 89 df e8 26 fe ff ff 0f b7 43 50 83 c0 01 66 89 43 50 f6 > 43 78 01 75 12 80 7b 42 00 48 8b 4b 68 8b 53 58 74 0f 66 87 44 51 04 <48> 89 > e8 5b 5d c3 cc cc cc cc 66 89 44 51 04 0f ae f0 48 89 e8 5b > [ 213.796230] RSP: 0018:ff4bbb362306f9b0 EFLAGS: 00000246 > [ 213.796233] RAX: 0000000000000000 RBX: ff2f15095896f000 RCX: > 0000000000000001 > [ 213.796235] RDX: 0000000000000000 RSI: ff4bbb362306f9cc RDI: > ff2f15095896f000 > [ 213.796236] RBP: 0000000000000000 R08: 0000000000000000 R09: > 0000000000000000 > [ 213.796237] R10: 0000000000000003 R11: ff2f15095893cc40 R12: > 0000000000000002 > [ 213.796239] R13: 0000000000000004 R14: 0000000000000000 R15: > ff2f1509534f3000 > [ 213.796240] FS: 00007f775847d0c0(0000) GS:ff2f1528bac00000(0000) > knlGS:0000000000000000 > [ 213.796242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 213.796243] CR2: 0000557f987b6e70 CR3: 0000002098602006 CR4: > 0000000000f71ef0 > [ 213.796245] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > [ 213.796246] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: > 0000000000000400 > [ 213.796247] PKRU: 55555554 > [ 213.796249] Call Trace: > [ 213.796250] <IRQ> > [ 213.796252] ? watchdog_timer_fn+0x1c0/0x220 > [ 213.796258] ? __pfx_watchdog_timer_fn+0x10/0x10 > [ 213.796261] ? __hrtimer_run_queues+0x1af/0x380 > [ 213.796269] ? hrtimer_interrupt+0xf8/0x230 > [ 213.796274] ? __sysvec_apic_timer_interrupt+0x64/0x1a0 > [ 213.796279] ? sysvec_apic_timer_interrupt+0x6d/0x90 > [ 213.796282] </IRQ> > [ 213.796284] <TASK> > [ 213.796285] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 > [ 213.796293] ? virtqueue_get_buf_ctx_split+0x8d/0x110 > [ 213.796297] virtnet_send_command+0x18a/0x1f0 [virtio_net] > [ 213.796310] _virtnet_set_queues+0xc6/0x120 [virtio_net] > [ 213.796319] virtnet_probe+0xa06/0xd50 [virtio_net] > [ 213.796328] virtio_dev_probe+0x195/0x230 > [ 213.796333] really_probe+0x19f/0x400 > [ 213.796338] ? __pfx___driver_attach+0x10/0x10 > [ 213.796340] __driver_probe_device+0x78/0x160 > [ 213.796343] driver_probe_device+0x1f/0x90 > [ 213.796346] __driver_attach+0xd6/0x1d0 > [ 213.796349] bus_for_each_dev+0x8c/0xe0 > [ 213.796355] bus_add_driver+0x119/0x220 > [ 213.796359] driver_register+0x59/0x100 > [ 213.796362] ? __pfx_virtio_net_driver_init+0x10/0x10 [virtio_net] > [ 213.796369] virtio_net_driver_init+0x8e/0xff0 [virtio_net] > [ 213.796375] do_one_initcall+0x6f/0x380 > [ 213.796384] do_init_module+0x60/0x240 > [ 213.796388] init_module_from_file+0x86/0xc0 > [ 213.796396] idempotent_init_module+0x129/0x2c0 > [ 213.796406] __x64_sys_finit_module+0x5e/0xb0 > [ 213.796409] do_syscall_64+0x60/0xe0 > [ 213.796415] ? do_syscall_64+0x6f/0xe0 > [ 213.796418] ? lockdep_hardirqs_on_prepare+0xe4/0x1a0 > [ 213.796424] ? do_syscall_64+0x6f/0xe0 > [ 213.796427] ? do_syscall_64+0x6f/0xe0 > [ 213.796431] entry_SYSCALL_64_after_hwframe+0x6e/0x76 > [ 213.796435] RIP: 0033:0x7f7758f279cd > [ 213.796465] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 > f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d > 01 f0 ff ff 73 01 c3 48 8b 0d 33 e4 0c 00 f7 d8 64 89 01 48 > [ 213.796467] RSP: 002b:00007ffe2cad8738 EFLAGS: 00000246 ORIG_RAX: > 0000000000000139 > [ 213.796469] RAX: ffffffffffffffda RBX: 0000557f987a8180 RCX: > 00007f7758f279cd > [ 213.796471] RDX: 0000000000000000 RSI: 00007f77593e5453 RDI: > 000000000000000f > [ 213.796472] RBP: 00007f77593e5453 R08: 0000000000000000 R09: > 00007ffe2cad8860 > [ 213.796473] R10: 000000000000000f R11: 0000000000000246 R12: > 0000000000020000 > [ 213.796475] R13: 0000557f9879f8e0 R14: 0000000000000000 R15: > 0000557f98783aa0 > [ 213.796482] </TASK> > " > > Signed-off-by: Zhu Yanjun <yanjun....@linux.dev> > --- > drivers/net/virtio_net.c | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index 51b1868d2f22..28b7dd917a43 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -2468,7 +2468,7 @@ static bool virtnet_send_command(struct virtnet_info > *vi, u8 class, u8 cmd, > { > struct scatterlist *sgs[4], hdr, stat; > unsigned out_num = 0, tmp; > - int ret; > + int ret, timeout = 200; > > /* Caller should know better */ > BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)); > @@ -2502,8 +2502,14 @@ static bool virtnet_send_command(struct virtnet_info > *vi, u8 class, u8 cmd, > * into the hypervisor, so the request should be handled immediately. > */ > while (!virtqueue_get_buf(vi->cvq, &tmp) && > - !virtqueue_is_broken(vi->cvq)) > + !virtqueue_is_broken(vi->cvq)) { > + if (timeout) > + timeout--;
This is not really a timeout, just a loop counter. 200 iterations could be a very short time on reasonable H/W. I guess this avoid the soft lockup, but possibly (likely?) breaks the functionality when we need to loop for some non negligible time. I fear we need a more complex solution, as mentioned by Micheal in the thread you quoted. Cheers, Paolo