On Fri, Jan 19, 2024 at 10:27 PM Heng Qi <hen...@linux.alibaba.com> wrote:
>
>
>
> 在 2024/1/18 下午8:01, Zhu Yanjun 写道:
> >
> > 在 2024/1/16 20:04, Paolo Abeni 写道:
> >> On Mon, 2024-01-15 at 09:29 +0800, Zhu Yanjun wrote:
> >>> From: Zhu Yanjun <yanjun....@linux.dev>
> >>>
> >>> Some devices emulate the virtio_net hardwares. When virtio_net
> >>> driver sends commands to the emulated hardware, normally the
> >>> hardware needs time to response. Sometimes the time is very
> >>> long. Thus, the following will appear. Then the whole system
> >>> will hang.
> >>> The similar problems also occur in Intel NICs and Mellanox NICs.
> >>> As such, the similar solution is borrowed from them. A timeout
> >>> value is added and the timeout value as large as possible is set
> >>> to ensure that the driver gets the maximum possible response from
> >>> the hardware.
> >>>
> >>> "
> >>> [  213.795860] watchdog: BUG: soft lockup - CPU#108 stuck for 26s!
> >>> [(udev-worker):3157]
> >>> [  213.796114] Modules linked in: virtio_net(+) net_failover
> >>> failover qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common
> >>> intel_uncore_frequency intel_uncore_frequency_common intel_ifs
> >>> i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp
> >>> coretemp iTCO_wdt rapl intel_pmc_bxt dax_hmem iTCO_vendor_support
> >>> vfat cxl_acpi intel_cstate pmt_telemetry pmt_class intel_sdsi joydev
> >>> intel_uncore cxl_core fat pcspkr mei_me isst_if_mbox_pci
> >>> isst_if_mmio idxd i2c_i801 isst_if_common mei intel_vsec idxd_bus
> >>> i2c_smbus i2c_ismt ipmi_ssif acpi_ipmi ipmi_si ipmi_devintf
> >>> ipmi_msghandler acpi_pad acpi_power_meter pfr_telemetry pfr_update
> >>> fuse loop zram xfs crct10dif_pclmul crc32_pclmul crc32c_intel
> >>> polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3
> >>> bnxt_en sha256_ssse3 sha1_ssse3 nvme ast nvme_core i2c_algo_bit wmi
> >>> pinctrl_emmitsburg scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_multipath
> >>> [  213.796194] irq event stamp: 67740
> >>> [  213.796195] hardirqs last  enabled at (67739):
> >>> [<ffffffff8c2015ca>] asm_sysvec_apic_timer_interrupt+0x1a/0x20
> >>> [  213.796203] hardirqs last disabled at (67740):
> >>> [<ffffffff8c14108e>] sysvec_apic_timer_interrupt+0xe/0x90
> >>> [  213.796208] softirqs last  enabled at (67686):
> >>> [<ffffffff8b12115e>] __irq_exit_rcu+0xbe/0xe0
> >>> [  213.796214] softirqs last disabled at (67681):
> >>> [<ffffffff8b12115e>] __irq_exit_rcu+0xbe/0xe0
> >>> [  213.796217] CPU: 108 PID: 3157 Comm: (udev-worker) Kdump: loaded
> >>> Not tainted 6.7.0+ #9
> >>> [  213.796220] Hardware name: Intel Corporation
> >>> M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926
> >>> 11/14/2022
> >>> [  213.796221] RIP: 0010:virtqueue_get_buf_ctx_split+0x8d/0x110
> >>> [  213.796228] Code: 89 df e8 26 fe ff ff 0f b7 43 50 83 c0 01 66 89
> >>> 43 50 f6 43 78 01 75 12 80 7b 42 00 48 8b 4b 68 8b 53 58 74 0f 66 87
> >>> 44 51 04 <48> 89 e8 5b 5d c3 cc cc cc cc 66 89 44 51 04 0f ae f0 48
> >>> 89 e8 5b
> >>> [  213.796230] RSP: 0018:ff4bbb362306f9b0 EFLAGS: 00000246
> >>> [  213.796233] RAX: 0000000000000000 RBX: ff2f15095896f000 RCX:
> >>> 0000000000000001
> >>> [  213.796235] RDX: 0000000000000000 RSI: ff4bbb362306f9cc RDI:
> >>> ff2f15095896f000
> >>> [  213.796236] RBP: 0000000000000000 R08: 0000000000000000 R09:
> >>> 0000000000000000
> >>> [  213.796237] R10: 0000000000000003 R11: ff2f15095893cc40 R12:
> >>> 0000000000000002
> >>> [  213.796239] R13: 0000000000000004 R14: 0000000000000000 R15:
> >>> ff2f1509534f3000
> >>> [  213.796240] FS:  00007f775847d0c0(0000) GS:ff2f1528bac00000(0000)
> >>> knlGS:0000000000000000
> >>> [  213.796242] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>> [  213.796243] CR2: 0000557f987b6e70 CR3: 0000002098602006 CR4:
> >>> 0000000000f71ef0
> >>> [  213.796245] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> >>> 0000000000000000
> >>> [  213.796246] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7:
> >>> 0000000000000400
> >>> [  213.796247] PKRU: 55555554
> >>> [  213.796249] Call Trace:
> >>> [  213.796250]  <IRQ>
> >>> [  213.796252]  ? watchdog_timer_fn+0x1c0/0x220
> >>> [  213.796258]  ? __pfx_watchdog_timer_fn+0x10/0x10
> >>> [  213.796261]  ? __hrtimer_run_queues+0x1af/0x380
> >>> [  213.796269]  ? hrtimer_interrupt+0xf8/0x230
> >>> [  213.796274]  ? __sysvec_apic_timer_interrupt+0x64/0x1a0
> >>> [  213.796279]  ? sysvec_apic_timer_interrupt+0x6d/0x90
> >>> [  213.796282]  </IRQ>
> >>> [  213.796284]  <TASK>
> >>> [  213.796285]  ? asm_sysvec_apic_timer_interrupt+0x1a/0x20
> >>> [  213.796293]  ? virtqueue_get_buf_ctx_split+0x8d/0x110
> >>> [  213.796297]  virtnet_send_command+0x18a/0x1f0 [virtio_net]
> >>> [  213.796310]  _virtnet_set_queues+0xc6/0x120 [virtio_net]
> >>> [  213.796319]  virtnet_probe+0xa06/0xd50 [virtio_net]
> >>> [  213.796328]  virtio_dev_probe+0x195/0x230
> >>> [  213.796333]  really_probe+0x19f/0x400
> >>> [  213.796338]  ? __pfx___driver_attach+0x10/0x10
> >>> [  213.796340]  __driver_probe_device+0x78/0x160
> >>> [  213.796343]  driver_probe_device+0x1f/0x90
> >>> [  213.796346]  __driver_attach+0xd6/0x1d0
> >>> [  213.796349]  bus_for_each_dev+0x8c/0xe0
> >>> [  213.796355]  bus_add_driver+0x119/0x220
> >>> [  213.796359]  driver_register+0x59/0x100
> >>> [  213.796362]  ? __pfx_virtio_net_driver_init+0x10/0x10 [virtio_net]
> >>> [  213.796369]  virtio_net_driver_init+0x8e/0xff0 [virtio_net]
> >>> [  213.796375]  do_one_initcall+0x6f/0x380
> >>> [  213.796384]  do_init_module+0x60/0x240
> >>> [  213.796388]  init_module_from_file+0x86/0xc0
> >>> [  213.796396]  idempotent_init_module+0x129/0x2c0
> >>> [  213.796406]  __x64_sys_finit_module+0x5e/0xb0
> >>> [  213.796409]  do_syscall_64+0x60/0xe0
> >>> [  213.796415]  ? do_syscall_64+0x6f/0xe0
> >>> [  213.796418]  ? lockdep_hardirqs_on_prepare+0xe4/0x1a0
> >>> [  213.796424]  ? do_syscall_64+0x6f/0xe0
> >>> [  213.796427]  ? do_syscall_64+0x6f/0xe0
> >>> [  213.796431]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
> >>> [  213.796435] RIP: 0033:0x7f7758f279cd
> >>> [  213.796465] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e
> >>> fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24
> >>> 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 33 e4 0c 00 f7 d8 64
> >>> 89 01 48
> >>> [  213.796467] RSP: 002b:00007ffe2cad8738 EFLAGS: 00000246 ORIG_RAX:
> >>> 0000000000000139
> >>> [  213.796469] RAX: ffffffffffffffda RBX: 0000557f987a8180 RCX:
> >>> 00007f7758f279cd
> >>> [  213.796471] RDX: 0000000000000000 RSI: 00007f77593e5453 RDI:
> >>> 000000000000000f
> >>> [  213.796472] RBP: 00007f77593e5453 R08: 0000000000000000 R09:
> >>> 00007ffe2cad8860
> >>> [  213.796473] R10: 000000000000000f R11: 0000000000000246 R12:
> >>> 0000000000020000
> >>> [  213.796475] R13: 0000557f9879f8e0 R14: 0000000000000000 R15:
> >>> 0000557f98783aa0
> >>> [  213.796482]  </TASK>
> >>> "
> >>>
> >>> Signed-off-by: Zhu Yanjun <yanjun....@linux.dev>
> >>> ---
> >>>   drivers/net/virtio_net.c | 10 ++++++++--
> >>>   1 file changed, 8 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> >>> index 51b1868d2f22..28b7dd917a43 100644
> >>> --- a/drivers/net/virtio_net.c
> >>> +++ b/drivers/net/virtio_net.c
> >>> @@ -2468,7 +2468,7 @@ static bool virtnet_send_command(struct
> >>> virtnet_info *vi, u8 class, u8 cmd,
> >>>   {
> >>>       struct scatterlist *sgs[4], hdr, stat;
> >>>       unsigned out_num = 0, tmp;
> >>> -    int ret;
> >>> +    int ret, timeout = 200;
> >>>         /* Caller should know better */
> >>>       BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ));
> >>> @@ -2502,8 +2502,14 @@ static bool virtnet_send_command(struct
> >>> virtnet_info *vi, u8 class, u8 cmd,
> >>>        * into the hypervisor, so the request should be handled
> >>> immediately.
> >>>        */
> >>>       while (!virtqueue_get_buf(vi->cvq, &tmp) &&
> >>> -           !virtqueue_is_broken(vi->cvq))
> >>> +           !virtqueue_is_broken(vi->cvq)) {
> >>> +        if (timeout)
> >>> +            timeout--;
> >> This is not really a timeout, just a loop counter. 200 iterations could
> >> be a very short time on reasonable H/W. I guess this avoid the soft
> >> lockup, but possibly (likely?) breaks the functionality when we need to
> >> loop for some non negligible time.
> >>
> >> I fear we need a more complex solution, as mentioned by Micheal in the
> >> thread you quoted.
> >
> > Got it. I also look forward to the more complex solution to this problem.
>
> Can we add a device capability (new feature bit) such as
> ctrq_wait_timeout to get a reasonable timeout?

This adds another kind of complexity for migration compatibility.

And we need to make it more general, e.g

1) it should not be cvq specific
2) or we can have a timeout that works for all queues

?

Thanks

>
> Thanks,
> Heng
>
> >
> > Zhu Yanjun
> >
> >>
> >> Cheers,
> >>
> >> Paolo
> >>
>


Reply via email to