On Tue, Jan 24, 2006 at 06:36:29PM +0200, Pekka Pietikainen wrote: > On Mon, Jan 23, 2006 at 08:03:15PM +0200, Pekka Pietikainen wrote: > > The box is a Nexcom NSA 1086 with 4x skge ports and 4x sky2. acpi=off made > > the driver work apparently, haven't used it with much load yet, though. > Ran the box for a while with some load (the sky2 ports on the box are only > used for sniffing, really, so no outbound traffic), and after a while > the box stopped receiving traffic on one of the interfaces (the one > with the most traffic). Tried rmmod/modprobe sky2, that didn't help as > well as disabling rx checksums with ethtool. Still happens with 2.6.16-rc1-git4 + sky2-0.15. I did get
sky2 eth3: rx error, status 0x7ffc2001 length 72 sky2 eth3: rx error, status 0x7ffc2001 length 72 sky2 eth3: rx error, status 0x7ffc2001 length 112 sky2 eth3: rx error, status 0x7ffc2001 length 108 sky2 eth3: rx error, status 0x7ffc2001 length 104 sky2 eth3: rx error, status 0x7ffc2001 length 80 sky2 eth3: rx error, status 0x7ffc2001 length 108 sky2 eth3: rx error, status 0x7ffc2001 length 112 sky2 eth3: rx error, status 0x7ffc2001 length 104 shortly after booting, then the box (NSA 1086) ran ok for quite some time, several hours. Then it just stopped accepting packets on one of the sky2 interfaces (others continued running). rmmod/modprobe fixed it now. Nothing in the logs, unfortunately. Ethtool showed link was still up... - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
