Hello,
>Motherboard?
Intel SE7520AF2 (Dual Xeon)
>Are you all using iptables?
YES
>Are you all routing?
NO
>From the reports I assume none of you are using an 82571/2/3 (pci express)?
08:04.0 Ethernet controller: Intel Corp.: Unknown device 1079 (rev 03)
Subsystem: Intel Corp.: Unknown device 341a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), cache line size 10
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at c800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabi
lities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
08:04.1 Ethernet controller: Intel Corp.: Unknown device 1079 (rev 03)
Subsystem: Intel Corp.: Unknown device 341a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), cache line size 10
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at cc00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabi
lities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
And, i can see, all testers using the E1000 card to serving web (or web
proxy) directly to internet. (or not?)
My dmesg: (kernel 2.6.15.7 + nbd-fix + E1000 driver from 2.6.16.1 version
6.3.9-k4)
Linux version 2.6.15.7-NBDFIX ([EMAIL PROTECTED]) (gcc version 4.0.0 20050519
(Red Hat 4.0.0-8)) #2 SMP Wed Mar 29 15:05:41 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable)
BIOS-e820: 00000000dffe0000 - 00000000dffef000 (ACPI data)
BIOS-e820: 00000000dffef000 - 00000000dfffdc00 (ACPI NVS)
BIOS-e820: 00000000dfffdc00 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
3712MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 1179648
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 950272 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f7f80
ACPI: RSDT (v001 A M I OEMRSDT 0x10000408 MSFT 0x00000097) @ 0xdffe0000
ACPI: FADT (v002 A M I OEMFACP 0x10000408 MSFT 0x00000097) @ 0xdffe0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000408 MSFT 0x00000097) @ 0xdffe0390
ACPI: MCFG (v001 A M I OEMMCFG 0x10000408 MSFT 0x00000097) @ 0xdffe04a0
ACPI: OEMB (v001 A M I AMI_OEM 0x10000408 MSFT 0x00000097) @ 0xdffef040
ACPI: DSDT (v001 ALIEF ALIEF086 0x00000086 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec85000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec85000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec85400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec85400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Built 1 zonelists
Kernel command line: root=/dev/nfs,rw nfsroot=192.168.2.1://NFS/ROOT-XEON1/
ip=:::::eth0:autoconf pci=routeirq vga=0x0f05 notsc
BOOT_IMAGE=20060329_XEON_2.6.15.7-NBDFIX-NEWe1000
notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec80400)
mapped IOAPIC to ffff9000 (fec85000)
mapped IOAPIC to ffff8000 (fec85400)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2992.695 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x30
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4149096k/4718592k available (3675k kernel code, 43856k reserved,
1225k data, 248k init, 3276672k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5989.80 BogoMIPS
(lpj=29949038)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.20 BogoMIPS
(lpj=29926009)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Booting processor 2/6 eip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5985.22 BogoMIPS
(lpj=29926134)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Booting processor 3/7 eip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5985.23 BogoMIPS
(lpj=29926183)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Total of 4 processors activated (23945.47 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=9
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:01:0c.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC1.DBSA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC1.DBSB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *7)
ACPI: PCI Interrupt Link [LNKB] (IRQs *7)
ACPI: PCI Interrupt Link [LNKC] (IRQs *7)
ACPI: PCI Interrupt Link [LNKD] (IRQs *7)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 52 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:08:04.1[B] -> GSI 53 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
pnp: 00:09: ioport range 0x680-0x69f has been reserved
pnp: 00:09: ioport range 0x640-0x65f has been reserved
pnp: 00:09: ioport range 0x600-0x60f has been reserved
pnp: 00:09: ioport range 0x6c0-0x6df has been reserved
pnp: 00:09: ioport range 0x700-0x71f has been reserved
pnp: 00:09: ioport range 0x720-0x73f has been reserved
pnp: 00:09: ioport range 0x740-0x74f has been reserved
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.2
IO window: c000-cfff
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: c000-cfff
MEM window: fe900000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: fc700000-fe7fffff
PREFETCH window: e2000000-e20fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.2 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1143712094.670:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Coda Kernel/Venus communications, v5.3.20, [EMAIL PROTECTED]
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver 2.1.25 [Flags: R/W].
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
kobject_register failed for radeonfb (-17)
[<c010360c>] dump_stack+0x16/0x1a
[<c02ad2d5>] kobject_register+0x37/0x4f
[<c0319cbb>] bus_add_driver+0x46/0xa6
[<c031a523>] driver_register+0x41/0x46
[<c02b5047>] __pci_register_driver+0x86/0x97
[<c05e01ef>] radeonfb_old_init+0x38/0x41
[<c05cc848>] do_initcalls+0x46/0x96
[<c05cc8cd>] do_basic_setup+0x21/0x23
[<c01003a5>] init+0xa2/0x199
[<c0100ea5>] kernel_thread_helper+0x5/0xb
Real Time Clock Driver v1.12
ipmi message handler version 38.0
PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: loaded (max 8 devices)
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 52 (level, low) -> IRQ 21
e1000: 0000:08:04.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:07:e9:32:e6:d8
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:08:04.1[B] -> GSI 53 (level, low) -> IRQ 22
e1000: 0000:08:04.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:07:e9:32:e6:d9
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Ethernet Channel Bonding Driver: v2.6.5 (November 4, 2005)
bonding: Warning: either miimon or arp_interval and arp_ip_target module
parameters must be specified, otherwise bonding will not detect link
failures! see bonding.txt for details.
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 18
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003
88:407f
ata1: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003
88:407f
ata2: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: WDC WD2000JD-19H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD2000JD-19H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
aoe: aoe_init: AoE v2.6-14 initialised.
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
I2O subsystem v1.288
i2o: max drivers = 8
I2O ProcFS OSM v1.145
i2c /dev entries driver
i2c-sis96x version 1.0.0
pc87360: PC8736x not detected, module not inserted.
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4862.400 MB/sec
raid5: using function: pIII_sse (4862.400 MB/sec)
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
registering ipv6 mark target
NET: Registered protocol family 17
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Using IPI Shortcut mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 192.168.2.1, my address is 192.168.2.50
IP-Config: Complete:
device=eth0, addr=192.168.2.50, mask=255.255.255.0, gw=192.168.2.100,
host=xeon, domain=, nis-domain=(none),
bootserver=192.168.2.1, rootserver=192.168.2.1, rootpath=/NFS/ROOT-XEON1/
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda2
md: sda2 has invalid sb, not importing!
md: invalid raid superblock magic on sdb2
md: sdb2 has invalid sb, not importing!
md: autorun ...
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md10
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md10: bitmap initialized from disk: read 9/9 pages, set 0 bits, status: 0
created bitmap (131 pages) for device md10
raid1: raid set md10 active with 2 out of 2 mirrors
md: ... autorun DONE.
Looking up port of RPC 100003/2 on 192.168.2.1
Looking up port of RPC 100005/1 on 192.168.2.1
VFS: Mounted root (nfs filesystem) readonly.
Freeing unused kernel memory: 248k freed
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it
to SG_IO
eth0: no IPv6 routers present
Cheers,
Janos
----- Original Message -----
From: "Herbert Xu" <[EMAIL PROTECTED]>
To: "Boris B. Zhmurov" <[EMAIL PROTECTED]>
Cc: "David S. Miller" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[email protected]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Thursday, March 30, 2006 12:12 PM
Subject: Re: [e1000 debug] KERNEL: assertion (!sk_forward_alloc) failed...
> On Thu, Mar 30, 2006 at 10:02:01AM +0000, Boris B. Zhmurov wrote:
> >
> > [EMAIL PROTECTED] linux-2.6.16]$ patch -p1 <
> >
../../../SOURCES/linux-2.6.16-e1000-try-to-fix-assertion_sk_forward_alloc_fa
iled_by_Herbert_Xu.patch
> >
> > patching file drivers/net/e1000/e1000_main.c
> > Reversed (or previously applied) patch detected! Assume -R? [n]
> >
> > Herbert, is that patch already included in 2.6.16.1?
>
> Not really. It's just patch being silly (or too smart :)
>
> Here it is again rediffed against 2.6.16.
> --
> Visit Openswan at http://www.openswan.org/
> Email: Herbert Xu ~{PmV>HI~} <[EMAIL PROTECTED]>
> Home Page: http://gondor.apana.org.au/~herbert/
> PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
>
>
> _____________ NOD32 1.584 (20031220) Információ _____________
>
> Az üzenetet a NOD32 Antivirus System megvizsgálta.
> http://www.nod32.hu
>
>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
