From: Marcin Wojtas <m...@semihalf.com>

Armada XP network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-xp.dtsi - for the actual common BM unit (bm@c0000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.

Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.

Signed-off-by: Marcin Wojtas <m...@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
---
 arch/arm/boot/dts/armada-xp.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index be23196829bb..bd459360d7a6 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -253,6 +253,14 @@
                                marvell,crypto-sram-size = <0x800>;
                        };
 
+                       bm: bm@c0000 {
+                               compatible = "marvell,armada-380-neta-bm";
+                               reg = <0xc0000 0xac>;
+                               clocks = <&gateclk 13>;
+                               internal-mem = <&bm_bppi>;
+                               status = "disabled";
+                       };
+
                        xor@f0900 {
                                compatible = "marvell,orion-xor";
                                reg = <0xF0900 0x100
@@ -291,6 +299,16 @@
                        #size-cells = <1>;
                        ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
                };
+
+               bm_bppi: bm-bppi {
+                       compatible = "mmio-sram";
+                       reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+                       ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       clocks = <&gateclk 13>;
+                       status = "disabled";
+               };
        };
 
        clocks {
-- 
2.5.0

Reply via email to