On Tue, Mar 29, 2016 at 1:05 PM, Grygorii Strashko <grygorii.stras...@ti.com> wrote: > On 03/29/2016 08:21 AM, Yegor Yefremov wrote: >> Hi Mugunthan, >> >> On Tue, Mar 29, 2016 at 6:00 AM, Mugunthan V N <mugunthan...@ti.com> wrote: >>> Hi Yegor >>> >>> On Wednesday 16 March 2016 08:35 PM, Yegor Yefremov wrote: >>>> I have an am335x based board using CPSW in Dual EMAC mode. Without >>>> VLAN IDs I can receive and send multicast packets [1]. When I create >>>> VLAN ID: >>>> >>>> ip link add link eth1 name eth1.100 type vlan id 100 >>>> ip addr add 192.168.100.2/24 brd 192.168.100.255 dev eth1.100 >>>> route add -net 224.0.0.0 netmask 224.0.0.0 eth1.100 >>>> >>>> I can successfully send multicast packets, but not receive them. On >>>> the other side of the Ethernet cable I've used Pandaboard. Pandaboard >>>> could both receive and send multicast packets via VLAN. >>> >>> Are you trying multicast tx/rx on eth1 or eth1.100? >> >> I'm trying multicast tx/rx on eth1.100. >> >> eth1 has no problems. >> > > it'd be nice if will be able to post here output fom commands: > # switch-config -d [git://git.ti.com/switch-config/switch-config.git v4.1] > # ifconfig -a > # tcpdump -e -f -Q in -i eth0 > # tcpdump -e -f -Q in -i eth0.100
Which kernel/branch do you want me to test? git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git and ti-rt-linux-4.1.y? So far I was using vanilla kernel. Yegor
