From: Felix Fietkau <[email protected]> Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means only some devices as most of BCM4708A0KF-s got core rev 4). This was tested for regressions on BCM47094 which doesn't seem to care which bit gets used.
Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Rafał Miłecki <[email protected]> --- If it's OK for everyone, I suggest taking this patch into net.git repo. It obviously can't regress old devices and was well tested on new ones by OpenWrt users. --- drivers/net/ethernet/broadcom/bgmac.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h index 4fbb093..9a03c14 100644 --- a/drivers/net/ethernet/broadcom/bgmac.h +++ b/drivers/net/ethernet/broadcom/bgmac.h @@ -199,9 +199,9 @@ #define BGMAC_CMDCFG_TAI 0x00000200 #define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ #define BGMAC_CMDCFG_HD_SHIFT 10 -#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */ -#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */ -#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) +#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */ +#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */ +#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0) #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ #define BGMAC_CMDCFG_AE 0x00400000 #define BGMAC_CMDCFG_CFE 0x00800000 -- 1.8.4.5
