Fix gpio active flag for the phy reset-gpios property. The line is
active low instead of active high.
Actually, this flags was never used by the macb driver.
Reported-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: David Miller <da...@davemloft.net>
Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com>
---
Hi,
Thanks for having reported this bug to me.
I hope that we will be able to move forward for changing the phy
reset code in the macb driver.
I plan to queue this patch through arm-soc for 4.7.
Thanks, best regards,
Nicolas
arch/arm/boot/dts/at91-vinco.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 79aec55e1ebc..6a366ee952a8 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -118,7 +118,7 @@
ethernet-phy@1 {
reg = <0x1>;
- reset-gpios = <&pioE 8
GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&pioB>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
};
@@ -162,7 +162,7 @@
reg = <0x1>;
interrupt-parent = <&pioB>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
- reset-gpios = <&pioE 6
GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
};
};
--
2.1.3
