When the transmit hardware timestamping is enabled, an additional
TxBD would be added and would be set as the last TxBD with TXBD_LAST
and TXBD_INTERRUPT. However this has been broken by a patch recently.
This made the software couldn't get transmit hardware timestamps and
resulted in call trace. So, this patch is to fix this issue.
Fixes: 48963b4492e9 ("gianfar: Remove redundant ops for do_tstamp
from xmit()")
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
drivers/net/ethernet/freescale/gianfar.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/gianfar.c
b/drivers/net/ethernet/freescale/gianfar.c
index 7615e06..2e6785b 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2440,7 +2440,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct
net_device *dev)
tx_queue->tx_ring_size);
if (likely(!nr_frags)) {
- lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
+ if (likely(!do_tstamp))
+ lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
} else {
u32 lstatus_start = lstatus;
--
2.1.0.27.g96db324
