On Fri, 8 Jul 2016 14:44:53 +0100 Jakub Kicinski <jakub.kicin...@netronome.com> wrote:
> On Thu, 7 Jul 2016 19:22:12 -0700, Alexei Starovoitov wrote: > > > > If the goal is to just separate XDP traffic from non-XDP traffic > > > you could accomplish this with a combination of SR-IOV/macvlan to > > > separate the device queues into multiple netdevs and then run XDP > > > on just one of the netdevs. Then use flow director (ethtool) or > > > 'tc cls_u32/flower' to steer traffic to the netdev. This is how > > > we support multiple networking stacks on one device by the way it > > > is called the bifurcated driver. Its not too far of a stretch to > > > think we could offload some simple XDP programs to program the > > > splitting of traffic instead of cls_u32/flower/flow_director and > > > then you would have a stack of XDP programs. One running in > > > hardware and a set running on the queues in software. > > > > > > the above sounds like much better approach then Jesper/mine > > prog_per_ring stuff. > > > > If we can split the nic via sriov and have dedicated netdev via VF > > just for XDP that's way cleaner approach. I guess we won't need to > > do xdp_rxqmask after all. > > +1 > > I was thinking about using eBPF to direct to NIC queues but concluded > that doing a redirect to a VF is cleaner. Especially if the PF driver > supports VF representatives we could potentially just use > bpf_redirect(VFR netdev) and the VF doesn't even have to be handled by > the same stack. I actually disagree. I _do_ want to use the "filter" part of eBPF to direct to NIC queues, and then run a single/specific XDP program on that queue. Why to I want this? This part of solving a very fundamental CS problem (early demux), when wanting to support Zero-copy on RX. The basic problem that the NIC driver need to map RX pages into the RX ring, prior to receiving packets. Thus, we need HW support to steer packets, for gaining enough isolation (e.g between tenants domains) for allowing zero-copy. Based on the flexibility of the HW-filter, the granularity achievable for isolation (e.g. application specific) is much more flexible. Than splitting up the entire NIC with SR-IOV, VFs or macvlans. -- Best regards, Jesper Dangaard Brouer MSc.CS, Principal Kernel Engineer at Red Hat Author of http://www.iptv-analyzer.org LinkedIn: http://www.linkedin.com/in/brouer
