NIC will be put into D3 state during runtime suspend state. When set or
get hardware wol setting, driver will write or read hardware registers.
If we set or get hardware wol setting in runtime suspend state, because
NIC will in D3 state, the hardware registers read by driver will return all
0xff. That will let driver thinking register flag is not toggled and
then prints the warning message "rtl_counters_cond == 1 (loop: 1000,
delay: 10)" to kernel log.

For fixing this issue, add checking driver's pm runtime status in
rtl8169_get_wol() and rtl8169_set_wol().

Signed-off-by: Chunhao Lin <h...@realtek.com>
---
 drivers/net/ethernet/realtek/r8169.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c 
b/drivers/net/ethernet/realtek/r8169.c
index 0e62d74..00c387b 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1749,13 +1749,21 @@ static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
 static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo 
*wol)
 {
        struct rtl8169_private *tp = netdev_priv(dev);
+       struct device *d = &tp->pci_dev->dev;
+
+       pm_runtime_get_noresume(d);
 
        rtl_lock_work(tp);
 
        wol->supported = WAKE_ANY;
-       wol->wolopts = __rtl8169_get_wol(tp);
+       if (pm_runtime_active(d))
+               wol->wolopts = __rtl8169_get_wol(tp);
+       else
+               wol->wolopts = tp->saved_wolopts;
 
        rtl_unlock_work(tp);
+
+       pm_runtime_put_noidle(d);
 }
 
 static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
@@ -1845,6 +1853,9 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, 
u32 wolopts)
 static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
        struct rtl8169_private *tp = netdev_priv(dev);
+       struct device *d = &tp->pci_dev->dev;
+
+       pm_runtime_get_noresume(d);
 
        rtl_lock_work(tp);
 
@@ -1852,12 +1863,17 @@ static int rtl8169_set_wol(struct net_device *dev, 
struct ethtool_wolinfo *wol)
                tp->features |= RTL_FEATURE_WOL;
        else
                tp->features &= ~RTL_FEATURE_WOL;
-       __rtl8169_set_wol(tp, wol->wolopts);
+       if (pm_runtime_active(d))
+               __rtl8169_set_wol(tp, wol->wolopts);
+       else
+               tp->saved_wolopts = wol->wolopts;
 
        rtl_unlock_work(tp);
 
        device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
 
+       pm_runtime_put_noidle(d);
+
        return 0;
 }
 
-- 
1.9.1

Reply via email to