On 16 August 2016 at 20:33, Marcel Holtmann <mar...@holtmann.org> wrote: > > Hi Guodong, > > >>> Two LED triggers are added into hci_dev: tx_led and rx_led. Upon ACL/SCO > >>> packets available in tx or rx, the LEDs will blink. > >>> > >>> For each hci registration, two triggers are added into LED subsystem: > >>> [hdev->name]-tx and [hdev-name]-rx. > >>> Refer to Documentation/leds/leds-class.txt for usage. > >>> > >>> Verified on HiKey 96boards, which uses HiSilicon hi6220 SoC and TI > >>> WL1835 WiFi/BT combo chip. > >> > >> so I have no idea what to do with adding adding hci0-rx and hci0-tx > >> triggers. Combined with hci0-power trigger these are already 3 triggers. > >> And if you have 2 Bluetooth controllers in your system, then you have 6 > >> triggers. > >> > > > > True, 6 triggers. But, taking example for other subsytems, eg. cpu > > cores. On my board, I have "heartbeat cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 > > cpu6 cpu7". It doesn't have to mean you need all of them connected to > > some LED(s). Actually, in most of the case, I only need heartbeat. > > > > > > > >> If we then maybe add another trigger, then this number just goes up and up. > >> > >> As far as I can tell you can only assign a single trigger to a LED. > >> > > > > That's true. And people got a choice of which feature he wants to visualize. > > and as a result we keep adding senseless triggers to the kernel and bloating > it up for no reason. Especially since it feels like 99% of the LED triggers > are not used at all. This makes no sense to me. > > >> So this means to even use these triggers, you need now 3 LEDs per > >> Bluetooth controller. How is that useful for anybody in a real system? > >> Maybe I am missing something here and somehow there is magic to combine > >> triggers, but I have not found it yet. So please someone enlighten me on > >> how this is suppose to be used with real devices. > >> > >> Recently I have added a simple bluetooth-power trigger that combines all > >> Bluetooth controllers into a single trigger. If any of them is enabled, > >> then you can control your LED. Which makes a lot more sense to me since > >> you most likely have a single Bluetooth LED on your system. And you want > >> it to show the correct state no matter what Bluetooth controller is in > >> use. However I can see the case that someone might want to assign one > >> specific Bluetooth controller to a LED status. > >> > >> So instead of adding many independent triggers to each controller, why not > >> create one global bluetooth trigger and one individual bluetooth-hci0 > >> trigger for each controller. And the combine power, tx, rx and whatever > >> else we need to trigger the LED for? > >> > > > > When I starting this work, I referred to WiFi system. See > > CONFIG_MAC80211_LEDS. WiFi system implements these types of triggers " > > phy0rx phy0tx phy0assoc phy0radio" for each 'controller'. > > And I actually wonder who ever used these triggers. You need 4 LEDs to > visualize the WiFi status. Which systems has 4 LEDs to spare to visualize > this. > > > Besides, there are also RFKILL which stands for WiFi/BT power status. > > RFKILL adds triggers for each module too. Eg. in the below example, I > > have one WiFi (phy0), one BT (hci0). Trigger rfkill1 equals to > > hci0-power. > > > > Ref: here are all LED triggers I found in my 96boards/HiKey: > > > > # cat trigger > > none kbd-scrollock kbd-numlock kbd-capslock kbd-kanalock kbd-shiftlock > > kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrlock > > kbd-ctrlllock kbd-ctrlrlock mmc0 mmc1 heartbeat cpu0 cpu1 cpu2 cpu3 > > cpu4 cpu5 cpu6 cpu7 mmc2 rfkill0 phy0rx phy0tx phy0assoc phy0radio > > hci0-power hci0-tx [hci0-rx] rfkill1 > > And how many LEDs do you have in the your system? I think you are making my > point here. > > So I think what we need to do is to not add to this madness and instead > create one "bluetooth" LED trigger that combines power and TX/RX for all > controllers. And then allow for individual "bluetooth-hci0" LED triggers so > that you can bind a single Bluetooth controller to a single LED. > > For me, if I can not combine hci0-power, hci0-tx and hci0-rx into a single > LED,
By combining them into a single LED, do you mean such a use case? - when hci0 is powered on, this LED starts on. - then, when there is tx/rx traffic, this LED should blink (reversely of course). - when hci0 is powered off, this LED turns off. -Guodong > it becomes utterly useless on pretty much every system that is out there. > > Regards > > Marcel >